-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 2 minutes
Tim's Takeaways: Stepping into the Great Unknown
“It’s time for you to go,” my flight instructor said.
I answered, “Well, it’s getting kind of late and the weather is starting to drop. Maybe we should put this off until…”
“Go now!” my instructor said.
My earlier jovial mood was now punctured by anxiety. But there was no way around it. It was time for my first solo flight as student pilot on June 8, 1990.
Many years ago, I was given the opportunity to switch my career path from senior circuit board designer to CAD systems administrator. I wasn’t certain that I wanted to give up the comfort of being a designer; after all, I had been one for a long time. But I knew that I wanted to grow in my career and this transition would help my overall knowledge base of everything CAD-related, as well as better position me in my quest for a management position. So, I pulled the trigger and accepted the new job even though the idea of stepping into the great unknown like that was very intimidating.
Walking to the plane I begin to mentally rehearse everything that I needed to do. I tell myself, “No pressure!”
After all, the only thing that could go wrong here is that any number of mistakes could result in my drilling a house-sized crater in the ground, leaving nothing but a grease stain for my family and friends to remember me by.
“No, stop it! Don’t think about stuff like that.” I admonish myself. “Don’t let your imagination get the better of you.” I force those thoughts down as I begin my pre-flight check.
Stretching and growing is an important part of life. Yes, it is tempting to stay where it is safe and warm, but that kind of life won’t help us to reach new heights. You can take a sailboat out onto the pond and use the motor to scoot around, but don’t kid yourself. You won’t really be sailing until you get onto a river or a lake and open up the full potential of the boat by unfurling the sails in a brisk wind. You may feel fear as the boat heels over in the wind, but under an experienced hand, that fear will transform into an incredible experience. And just like sailing, in order for us to become more than we are today we sometimes have to embrace the strong winds of change head-on, no matter how scary.
To read this entire article, which appeared in the July 2017 issue of The PCB Design Magazine, click here.
More Columns from Tim's Takeaways
Tim’s Takeaways: The Art of Technical InstructionTim’s Takeaways: PCB Design and Manufacturing—Let’s Work Together
Tim’s Takeaways: Take It From Scotty, Simple Really is Better
Tim’s Takeaways: Human Ingenuity and the Rigid-flex PCB
Tim’s Takeaways: How I Learned Advanced Design Strategies
Tim’s Takeaways: Batter Up—Stepping Up to the Substrate
Tim’s Takeaways: Tribal Knowledge—Not the Villain You Thought
Tim’s Takeaways: Threading the Needle Through Advanced Packaging