-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Part 2: EIPC’s 2018 Winter Conference in Lyon, Review of Day 1
February 19, 2018 | Pete Starkey, I-Connect007Estimated reading time: 12 minutes
Test room for electromagnetic compatibility
Vibration testing
SMT assembly line
For the most part, the shop was concerned with high-mix, small batch work, although a couple of long-running jobs were included to maintain continuity of operation. There was a full surface-mount line with two new pick-and-place machines with 25,000 components per hour capacity, a reflow oven, AOI and X-ray inspection, and a wave-solder line for manually inserted components. Alstom continued to use tin-lead solder. After 24-hours static burn-in, each completed assembly was ICT tested using bed-of-nails for long-running designs and flying-probe for prototypes. After testing, all assemblies were coated with a silicone conformal coating, applied manually. Every operation was recorded in a manufacturing control system. Every assembly was comprehensively labelled before being placed in storage or integrated into a rack to form a complete system, which was then subjected to burn-in and full functional test.
In a separate area delegates were shown Alstom’s global qualification and environmental testing laboratories, where all new designs were tested to a higher level than in production, and sample production assemblies were subjected to periodic re-qualification. The environmental testing included temperature cycling, shock and vibration, and electromagnetic compatibility. Railway devices operate in temperatures of -25°C to +70°C, and as low as -40°C in Russia! Alstom’s climatic laboratory was equipped with 10 chambers, each with a 1 metre cube capacity, and the facility to operate at -50°C to +130°C, with damp heat and salt spray as options.
It was well into the evening when delegates thanked their guides, peeled off their protective clothing and clambered wearily onto the buses that brought them back downtown to the internationally-famous Brasserie Georges for a magnificent conference dinner—a convivial opportunity for relaxing and networking.
Conference dinner
A few of the old and boring (the writer for example) retired to bed soon after dinner; others continued to make the most of the networking opportunity in the hotel bar, although the writer is reliably informed that the party dispersed at a reasonable hour!
I am grateful to Alun Morgan for allowing me to use his photographs.
Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.