Rigid-flex DFA
September 19, 2023 | Andy Shaughnessy, Design007Estimated reading time: 1 minute
Rigid-flex assembly brings its own set of issues, but designers can do quite a bit to make things easier on their downstream brethren. We asked IPC instructor Kris Moyer to give us the lowdown on DFA for rigid-flex circuitry.
Kris, what are some of the unique challenges related to assembling rigid-flex circuits?
There are several challenges to assembly of rigid-flex boards. First there is the alignment issue of the different sections of the boards. With a rigid board, the individual boards can be removed from the fabrication panel and run through the SMT assembly line without much problem, as long as the board is of sufficient size. In this case, the relative position of all the individual parts on the board remains consistent. But with rigid-flex, after the board is removed from the fabrication panel, the individual boards can move and rotate relative to each other within the limits of the flex material. This makes the placement of parts difficult to control. To overcome this, the board must be held in a restrained condition throughout the assembly process. This will require either the fabrication of a custom fixture to hold the board restrained during assembly or the design of temporary removable restraining mechanisms (rails) into the design of the board.
To read this entire conversation, which appeared in the September 2023 issue of Design007 Magazine, click here.
Suggested Items
TTM Technologies Appoints Wajid Ali to Board of Directors
05/10/2024 | TTM Technologies, Inc.TTM Technologies, Inc. announced that Mr Wajid Ali has been appointed by the unanimous vote of the remaining Directors to serve as a new Class I director on the Board, effective immediately.
Flex Announces Upcoming Changes to Its Board of Directors
05/07/2024 | FlexFlex announced that consistent with its succession plan, Michael D. Capellas, non-executive Chair of the Board of Directors of Flex, has informed the Board of his decision not to stand for re-election to the Board at the company's 2024 Annual General Meeting of shareholders to be held on August 8, 2024. Mr. Capellas has served on the company's board for 10 years, including as Chair since 2017, during which time he played a key role in building Flex's reputation as a trusted global technology, supply chain and manufacturing solutions partner and driving the company's success.
Happy’s Tech Talk #28: The Power Mesh Architecture for PCBs
05/07/2024 | Happy Holden -- Column: Happy’s Tech TalkA significant decrease in HDI substrate production cost can be achieved by reducing the number of substrate layers from conventional through-hole multilayers and microvia multilayers of eight, 10, 12 (and more), down to four. Besides reducing direct processing steps, yield will increase as defect producing operations are eliminated.
Real Time with…. IPC APEX EXPO 2024: Innovation and Collaboration at EPTAC
05/06/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and EPTAC Vice President Leo Lambert discuss the partnership between EPTAC and Blackfox, their program alignment, and future expansion plans. Leo introduces Burak Gokmen as the new "leader of the pack." The focus then shifts to Nano Dimensions' 3D printed circuit boards, emphasizing the need for proper documentation and training.
New Yorker, Major League Electronics Sign New Franchised Distribution Agreement
05/06/2024 | New Yorker Electronics Co.New Yorker Electronics, global distributor of electronic components, recently announced a new franchised distribution agreement with Major League Electronics, renowned manufacturer of interconnect products.