AISMALIBAR to Present FASTHERM at Ford Advanced Lighting Innovation Expo


Reading time ( words)

Aismalibar is set to introduce their newest product offering, FASTHERM, at the Ford Advanced Lighting Innovation Expo (ALIE) show in Dearborn, MI on October 5-6.  

FASTHERM was developed by Aismalibar to achieve a faster thermal transition from the LED thermal pad to the heat sink. This technology allows LEDs to operate at a temperature 30°C to 50°C lower due to the direct thermal transition from the thermal pad to the heat sink. This superior thermal transition can be achieved by using the entire COBRITHERM HTC product range with either a copper or copper/aluminium base. 

Jeff Brandman, President of Aismalibar North America, remarks, “We’re very excited to conintue to work with FORD in automotive lighting product development.  It is exciting to introduce FASTHERM at such a specialized event and we look forward to presenting our technical capabilities to all stakeholders at the expo.”

ALIE is a unique, ground-breaking opportunity to network with top global OEMS, manufacturers, engineers, buyers and designers directly involved in new and innovative automotive lighting technology. Aismalibar will be presenting at the private exhibitor showcase at 1:00pm on October 6 and can be found at booth 11 thoughout the duration of the expo.  

Aismalibar is a global leader for insulated metal substrates used in the manufacturing of automotive lighting. With strong relationships with many TIER 1 suppliers their products can be found in lighting for many vehicles manufactured around the world and are in current generation Ford, Mercedes, Audi and BMW vehicles among others. 

For more information on these products and more, visit them at the show in booth #11. 

About Aismalibar 

Aismalibar was one of the first IMS laminate manufacturers in the world and was the first in Europe. AISMALIBAR is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm® is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. AISMALIBAR has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.

Share

Print


Suggested Items

Microvias: Links of Faith are Not Created Equally

07/18/2019 | Jerry Magera and J.R. Strickland, Motorola Solutions Inc.
Microvias connect adjacent copper layers to complete electrical paths. There are copper-filled microvias, which can be stacked to form connections beyond adjacent copper layers, and staggered microvias, which stitch adjacent copper layers with paths that meander on the layers between the microvias. This article discusses the various laser-drilled microvias and presents SEM photographs to begin the search for the root cause of weak copper interface.

An Examination of Glass-fiber and Epoxy Interface Degradation in Printed Circuit Boards

07/12/2019 | Bhanu Sood, Michael Osterman, and Michael Pecht, Center for Advanced Life Cycle Engineering
Multilayer organic laminates, which make up over 90% of the interconnecting substrates in electronics (standard FR-4 represents 85% of the substrates used for laminates), can develop a loss of electrical insulation resistance between two biased conductors due to conductive filament formation.

Emma Hudson: From Tomboy to Tech Lead

06/21/2019 | Gen3
Interview between Emma Hudson and Gayle Paterson, founder of FLITE (Female Leaders in Tech, Everywhere).



Copyright © 2019 I-Connect007. All rights reserved.