-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
IPC Standards Committee Reports — Assembly and Joining, Product Assurance
November 22, 2016 | IPCEstimated reading time: 4 minutes
These standards committee reports from IPC’s 2016 Fall Committee Meetings have been compiled to help keep you up to date on IPC standards committee activities. This is the second in a series of reports.
Assembly and Joining
The 5-20 Product Assurance Committee reviewed the status of the projects in its scope and started planning for the meetings to be held at IPC APEX EXPO 2017.
The 5-21a Component mounting subcommittee met to discuss the update of the Guidelines for Printed Board Component Mounting. The new document, IPC-7070 will be created by combining parts of IPC-770, IPC-7351B, IPC-7093 and IPC-7095. The goal is to gather all the component information into one document to make it more user friendly.
The 5-21f Ball Grid Array Task Group continued its review of action items for IPC-7095D, Design and Assembly Process Implementation for BGAs. Particular focus at this meeting was spent on incorporating new information on column grid array (CGA) technology.
The 5-21g Flip Chip Mounting Task Group made the determination that it will go into full revision and not just an amendment for IPC-7094, Design and Assembly Process Implementation for Flip Chip and Die Size Components. A working draft IPC-7094A will be distributed to the task group before the end of 2016.
The 5-21h Bottom Termination Components Task Group reviewed a major overhaul proposed for the document for the A revision of IPC-7093, Design and Assembly Process Implementation for Bottom Termination SMT Components. These changes are being led by Matt Kelly with IBM and Udo Welzel with Bosch, who will present a polished working draft for task group review and comment in early 2017. Additionally, Matt Kelly was named vice-chair of the task group, replacing Vern Solberg, who stepped down from this role after years of service.
The 5-22a J-STD-001 Task Group reviewed comments on IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies. This task group met to resolve comments on criteria common to both IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies, and IPC-A-610, Acceptability for Electronic Assemblies. For the first time, the group also met at the same time with the Task Groups working on IPC-A-610, Acceptability for Electronic Assemblies and IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies to resolve differences between the three documents addressing the same criteria.
The 5-22ad Requirements for Military Systems Work Group continued a discussion on content to address hardware contracted by the U.S. Department of Defense and used in military systems. They previously discussed a separate addendum, however during this meeting, they took action to review the J-STD-001FS, Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies. They are considering a joint effort with that Task Group.
The 5-22as Task Group discussed review comments from the Final Industry Review of the addendum to 5-22as, Space Applications Electronic Hardware Addendum to IPC J-STD-001F Requirements for Soldered Electrical and Electronic Assemblies.
The 5-22f Task Group discussed comments to the document and prepared for a draft for Final Industry Review of the Handbook and Guide to Supplement J-STD-001.
The 5-22h Thermal Profiling Guide Task Group is preparing the ballot version of IPC-7530A, Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave), once all comments from the Final Draft for Industry Review have been resolved. The task group plans to ballot IPC-7530A by the end of October and to publish by APEX EXPO 2017. This will be the first revision since its publication in 2001.
The 5-22k Bottom Termination Components Test Methods Task Group reviewed comments from the working draft distribution of IPC-TM-650, Test Method 2.4.35, Dye and Pry Test Method. The task group approved the draft to go to the 7-11 Test Methods Subcommittee for comment. The group will also seek out companies and test labs to participate in a gage R&R for the test method.
Product Assurance
The 7-30 Product Assurance Committee reviewed the status of the projects in its scope and started planning for IPC APEX EXPO 2017.
The 7-31b IPC-A-610 Task Group reviewed comments on IPC-A-610, Acceptability for Electronic Assemblies. The Task Group met to resolve comments on criteria comment to both IPC-A-610, Acceptability for Electronic Assemblies, and IPC J-STD-001, Requirements for Soldered Electrical and Electronic Assemblies.
The 7-31f Task Group met to discuss the comments received during the draft for final industry review period for IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies.
The 7-31k Wire Harness Design Task Group and 7-31h IPC-HDBK-620 Handbook Task Group continued working IPC-HDBK-620, Handbook and Guide to Supplement IPC-A-620.
The 7-31j Task Group continued working on a revision to IPC-A-630, Acceptability Standard for Manufacture, Inspection and Testing of Electronic Enclosures.
The 7-31m Fiber Optic Cable Acceptability Task Group met to discuss final changes and to resolve comments for IPC-A-640, Acceptance Requirements for Optical Fiber, Optical Cable and Hybrid Wiring Harness Assemblies. The task group plans to ballot the draft standard by the end of the year, so it will be approved for publication before APEX EXPO 2017.
The 7-34 Repairability Subcommittee reviewed comments submitted to IPC-7711/21, Rework, Modification and Repair of Electronic Assemblies, during the draft for final industry review period.
Suggested Items
Stan Rak: Elevating the Ideas and Insights of IPC's Thought Leaders Program
04/25/2024 | Stanton Rak, SF Rak CompanyAs a member of the IPC Thought Leaders Program (TLP), I am responsible for identifying knowledge-sharing opportunities that can generate ideas and insights that strengthen the IPC community as well as create a sustainable and lasting future for its members. I am delighted to highlight some of my recent contributions as a member of the TLP.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.