IPC APEX EXPO 2017 Advanced Registration Ending Soon


Reading time ( words)

Nothing compares to IPC APEX EXPO for the opportunity to make new connections or strengthen existing ones—the ability to interact with your peers face-to-face is consistently mentioned as a top benefit of attending. Which is why the special events planned for IPC APEX EXPO 2017 may turn out to be some of the most valuable ways to spend your time in San Diego.

Among the special events at IPC APEX EXPO 2017 are as follows:

February 13

February 14

February 15

Tuesday - Thursday (Open During Exhibition Hours)

  • Flexible Hybrid Printed Electronics Pavilion - New for 2017!
  • IPC 2581 Consortium Showcase

Advance Registration, which provides savings of 20%, ends this Thursday, January 12.

The event also highlights IPC’s 60th anniversary. Join us onsite at IPC APEX EXPO for IPC's very special 60th Anniversary Celebration on Wednesday, February 15 from 6:00 pm-8:00 pm.

Share


Suggested Items

Golden Anniversary for EIPC at the 2018 Summer Conference

06/11/2018 | Barry Matties, I-Connect007
June marks the start of summer, and with that, the EIPC’s annual summer conference. Highlighted by its thought-provoking presentations, social outings and factory tours, the conference continues to be valuable and productive for attendees. This year should prove no different, with EIPC set to celebrate its 50th anniversary. I spoke with EIPC Executive Director Kirsten Smit-Westenberg about what can be expected from the upcoming conference in Düsseldorf, Germany.

Experts Discussion: The Flex Technologists Speak

06/05/2018 | I-Connect007 Editorial Team
For our first issue of the Flex007 Magazine, we invited a group of flexible circuit experts to discuss their work in this rapidly growing segment. Participants included Jonathan Weldon of DuPont, Mark Finstad of Flexible Circuit Technologies, and Scott McCurdy and Scott Miller of Freedom CAD. In a free-wheeling discussion with Andy Shaughnessy and Barry Matties, these technologists share their thoughts on the challenges and opportunities in flexible circuits, as well as what constitutes the cutting edge of flex right now.

ACE’s AccuWrap Simplifies Multiple Sequential Laminations with Blind Vias

05/29/2018 | Andy Shaughnessy
At DesignCon 2018, I spoke with James Hofer, general manager for Accurate Circuit Engineering, a quick-turn fabricator based in Santa Ana, California. James gave me a preview of AccuWrap, a new type of processing technology that lets designers reduce the amount of copper during sequential laminations while still meeting IPC specs, which should be of great interest to RF designers.



Copyright © 2018 I-Connect007. All rights reserved.