atg Luther & Maelzer Introduces Highly Automated 'A8a' Flying Probe Test System at IPC APEX EXPO 2017

Reading time ( words)

atg Luther & Maelzer GmbH will use the IPC APEX  EXPO 2017 to introduce its new A8a Automatic Bare Board Flying Probe Test System to the North American market.

atg A8a:  High Speed – High volume Flying Probe Test  with  Automation

The tester will be on display at the atg Luther & Maelzer Booth #3645 on February 14–16, 2017 at the San Diego Convention Center in San Diego, California.

"The A8a is atg-LM's latest innovation in high performance, high accuracy automatic flying probe testing," says atg Luther & Maelzer North American Sales Director Klaus Koziol.

The A8a provides the flexibility of flying probe test while delivering high throughput. To achieve high throughput, the key features of the A8a is a new design dual shuttle system which reduces the product exchange time to zero. In addition to superior test speed of up to 140 measurements per second, the A8a provides innovative load/unload and pass/fail sorting for true automatic "lights-out" operation.

Typical features such as high accuracy Kelvin 4 wire, Embedded Component and Latent defect test are available as well as a Tension clamp set up for flexible products.

About atg Luther & Maelzer

atg Luther & Maelzer is a leading supplier of electrical testing solutions for the Printed Circuit Board industry. We offer solutions for every application regardless of product type, batch size or technology deployed. Our atg flying probe tester products are renowned for  automation, speed, accuracy, versatility and ease of use. Our Luther & Maelzer universal grid tester product range is known world wide for high throughput, repeatability and accuracy.

By working closely together with all our customers and insuring new innovations through constant research and development atg Luther & Maelzer provides quality products and solutions for printed circuit board manufacturers worldwide.


Suggested Items

Ventec: Eye on the Future, with Automotive and Lighting Front and Center

12/19/2017 | Pete Starkey and Patty Goldman, I-Connect007
Ventec’s Thomas Michels and Didier Mauve sat down with I-Connect007 Editors Patty Goldman and Pete Starkey and enjoyed an upbeat and enlightening conversation. Among the topics covered were the importance of working partnerships in maintaining supply chain continuity, market drivers for thermally conductive materials, and development of enabling technologies to support the automotive electronics revolution.

A Fresh Look at Outsourcing Solutions in Electrical Testing

12/18/2017 | Pete Starkey, I-Connect007
In this interview conducted at productronica 2017, Gardien Group COO Roland Valentini describes to Pete Starkey the limitations of the traditional outsourcing model for electrical testing and explains the need for customised solutions directly catered to customers’ individual requirements.

Viking: Covering the Globe with Value-Added Services

12/14/2017 | Barry Matties, I-Connect007
In the final hours of productronica 2017, Barry Matties met with Jake Kelly of Viking to discuss the company’s value-added services, their growth in the India and America markets, and the UCE manufactured line they displayed at productronica.

Copyright © 2018 I-Connect007. All rights reserved.