Aismalibar North America to Exhibit at Strategies in Light

Reading time ( words)

Aismalibar is exhibiting at the Strategies in Light trade show in Anaheim, California this week. Strategies in Light, being held February 28 to March 2, is the leading LED and lighting event in North America and has been for more than 15 years. Aismalibar North America can be found at booth 422 and encourages all to come see their cutting edge thermal management solutions.

Aismalibar will be showcasing their newest high technology insulated metal substrate, Cobritherm Ultra-Thin. Aismalibar developed Ultra-Thin with a dielectric layer thickness of only 35 microns, which provides higher thermal performance and excellent working temperatures. This product is well suited for high-end LED applications.

In addition, Aismalibar will be featuring FASTHERM. This product is used to achieve a faster thermal transition from the LED thermal pad to the heat sink. This technology allows LEDs to operate at a temperature 30°C to 50°C lower due to the direct thermal transition from the thermal pad to the heat sink. This superior thermal transition can be achieved by using the entire COBRITHERM HTC product range with either a copper or copper/aluminium base.

About Aismalibar 

Aismalibar was one of the first IMS laminate manufacturers in the world and was the first in Europe. Aismalibar is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm ® is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. Aismalibar has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.

 

05/23/2023 | Barry Matties and Nolan Johnson, I-Connect007

Every industry has a beginning, and we are lucky to have Rex Rozario here to share the story of how the printed circuit board industry got its start. I-Connect007 chatted with Rex recently about how he became involved with circuit board inventor Dr. Paul Eisler.

05/17/2023 | Andy Shaughnessy, Design007 Magazine

At the SMTA Atlanta Expo and Tech Forum, I spoke with NCAB Group Field Application Engineer Ramon Roche, who gave a presentation at the show titled, “Technical Trends in the Global PCB Industry.” Ramon and I discussed his presentation, the emerging technologies that have NCAB’s focus over the next few years, and why semi-additive processes may be the key to succeeding with ultra HDI technology.

05/10/2023 | Pete Starkey, I-Connect007

It’s been a little while since I first had the opportunity to review an EIPC Technical Snapshot webinar. This excellent series began in October 2020 when our industry was besieged by the COVID-19 pandemic. It has continued successfully as restrictions have lifted and provides an effective channel for the efficient sharing of relevant knowledge that complements the traditional live conferences. The 20th in the series, in December 2022, focused on environmental issues impacting the electronics industry. In early February, EIPC held its live Winter Conference in Lyon and now, by popular demand, the 21st Technical Snapshot fills a slot before the Summer Conference scheduled for mid-June in Munich.