RTW IPC APEX EXPO: Candor Industries' Unique Capabilities Through an Alternative PCB Manufacturing Process


Reading time ( words)

Sunny Patel, Technical Sales Manager with Candor Industries, tells Guest Editor Kelly Dack about their unique manufacturing method that not only improves PCB process turnaround time but also yields much tighter design constraint quality.


Share


Suggested Items

Final Finishes: Taking Gold Thickness into Account

10/31/2017 | Patty Goldman, I-Connect007
Martin Bunce was one of several people from MacDermid Enthone who presented at SMTA International this year. He sat down with me for a chat about his paper on final finishes, particularly with regard to controlling gold thickness.

Process Engineering & Defect Prevention

10/06/2017 | Michael Carano, RBP Chemical Technology
Defects may “manifest” or be detected in or after a specific operation within the printed circuit board manufacturing process, but the underlying root cause may have occurred earlier (perhaps much earlier) in the process.

Institute of Circuit Technology Hayling Island Seminar 2017

10/04/2017 | Pete Starkey, I-Connect007
This year’s event had a well-chosen and varied programme featuring presentations on process chemistry and R&D consortia, a discussion of controversial standards proposals and a review of the experiences of commissioning new technology in a start-up factory.



Copyright © 2017 I-Connect007. All rights reserved.