-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Tom Hausherr Discusses PCB Libraries’ BOM Builder Service
March 15, 2017 | Kelly Dack, CID+Estimated reading time: 13 minutes
PCB Libraries CEO Tom Hausherr and Editor Kelly Dack discuss PCB Libraries’ new BOM Builder service during IPC APEX EXPO. Equipped with the new LEAP technology, the BOM Builder can potentially save PCB designers days or weeks of time normally spent turning a BOM into a CAD library.
Kelly Dack: Managing data has always been a challenge. What can be done to simplify the process? I’m speaking with Tom Hausherr, an industry expert in PCB libraries and all things data. Welcome, Tom. As far as assembly information and assembly data, what do you see as some of the challenges that designers face in organizing and implementing strategies for assembly?
Tom Hausherr: The assembly standard for solder joint acceptability is IPC-J-STD-001. The big challenge designers face is creating CAD library parts that meet this industry standard. I took the IPC CIT training class to learn about J-STD-001 and I was surprised to find out that the IPC-7351 land pattern standard did not really match up with J-STD-001 rules. PCB Libraries Inc. took the IPC-7351 and expanded the terminal lead solder joint goals into various case sizes and pin pitches. An example of this is the chip component family or “rectangular end cap” terminal lead. IPC-7351 solder joint goals for the nominal density level are 0.35 mm Toe for all chip components. But the J-STD-001 indicates that the toe solder joint acceptability be minimum 25% of the height or 0.50 mm whichever is less. This clearly indicates that the toe dimension for 01005, 0201, 0402, 0603, 0805 and 1206 should be different values and the default values must be editable by the end user to meet their specific assembly shop tolerances.
Dack: Is it typically the schematic that serves as the hub of the information for PCB layout?
Hausherr: It does, because the schematic contains all the information that derives the netlist for the routing connections and the bill of materials, which is normally in Excel spreadsheet format.
Dack: Once the information is broken out, exported or otherwise utilized for the layout, what's the next step?
Hausherr: The dilemma in the industry today, and it's been this way for decades, is that the PCB designer is handed a package of data, including the BOM spreadsheet, and they must spend time, in some cases a week, disseminating all this data from the engineer. Creating the new PCB library parts is the most time consuming process. The PCB designer will first search in the existing corporate library and isolate all new part numbers that require library creation. Then the PCB designer or CAD librarian will use the internet to search and locate the package dimensional datasheet. This is a very tedious, time-consuming process to go from bill of materials to a full-blown CAD library with 3D STEP for a specific PCB layout.
Dack: This information is a repetitive function if it's not captured at a certain point, isn’t it? Is it something that's replicated unnecessarily over and over, or are there automated ways of dealing with this?
Hausherr: Duplication of effort is rampant in the CAD library industry. There are automated ways to prevent duplication of work, but the component manufacturing industry is consistently releasing new technology to the industry at the rate of thousands of new part numbers every week. Many of these new logical device part numbers reuse the same physical package data which would use an existing footprint pattern. There are over 100 million different part numbers in the industry today. We are estimating 200 million mfr. part numbers by the year 2020. The acceleration of new component packages seems to be increasing. Trying to keep up with this massive amount of content and totally eliminate duplication is difficult. And component package obsolescence is another factor. There are parts in every CAD library that are obsolete, but they’re still maintained and rarely purged. If your CAD library is 20 years old and built by many people using different rules, it’s probably best to start the creation of a new library from scratch using modern technology and updated rules.
Dack: As a designer or an engineer, or anyone capturing the information for a particular design, it's not necessary to address all of those parts; however, what automation solution does PCB Libraries offer?
Hausherr: PCB Libraries is introducing to the electronics industry new program called the “BOM Builder Service” where designers or engineers import their Excel spreadsheet bill of material into Library Expert Pro and that creates a neutral FPX file. The customer emails the FPX file to bom@pcblibraries.com, and in as little as 10-15 minutes the FPX file is returned to the customer with the component dimensional data or the manufacturer recommended land patterns that are on our cloud server. If the BOM request contains parts that are not on our Parts on Demand (POD) server, we build the remaining standard parts for free with a 24-hour delivery. Once the designer has the component dimensions loaded into Library Expert Pro, they run the dimensional data through their personal Preferences for pad shapes, drafting items, polarity options, footprint rotation and origin, solder joint goals, density level and library rules and output to their CAD tool. The design of the resulting footprints is fully customized by the user preferences. This is totally the opposite of static CAD library parts offered by everyone else in this business space.
Page 1 of 3
Suggested Items
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation are proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia. on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.