RTW IPC APEX EXPO: New Dimensions in Fine-Pitch Probe Testing from Microcraft


Reading time ( words)

MicroCraft introduces two new product lines. Regional Sales Manager Jesse Ziomek describes a flying-probe tester capable of hitting 0.4 mil pads at 2 mil pitch without sacrifice of testing speed, and a digital ink-jet printer able to print both solder resist and legend in the same cycle. MicroCraft’s own range of qualified inks are now available.

Watch the interview here.

Share


Suggested Items

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.

Thermal Capabilities of Solder Masks: How High Can We Go?

08/24/2018 | Sven Kramer, Lackwerke Peters
This article focuses on three different coating material groups that were formulated to operate under high thermal stress and are applied at the printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications.

Circuit Automation on the Ever-Evolving World of Solder Mask

08/23/2018 | I-Connect007 Editorial Team
In a recent conference call, I-Connect007 editorial team was joined by Circuit Automation’s Yuki Kojima, VP of engineering; Larry Lindland, sales and applications manager; and Tom Meeker, CEO, for a lively discussion about solder mask. Spoiler: It’s not all about the equipment.



Copyright © 2018 I-Connect007. All rights reserved.