UL-Certification for Ventec’s IMS Products Extended to Alternative Copper-Base Options


Reading time ( words)

Ventec International Group's UL-certification has been extended for the IMS range of products to cover the addition of alternative copper-base options.

UL's investigation of Ventec's VT-B series IMS products (VT-4B, VT-4B PP, VT-4B RCC, VT-4B 3S) has been completed and the products were determined to comply with the applicable requirements for the addition of an alternative copper base for the existing metal base laminate grade. The extension of UL-approval for products using copper heat-sink substrates as an alternative to aluminum, expands Ventec's IMS offering for high-end, high-performance applications, in particular for automotive customers.

"We're working closely with the engineering teams at suppliers of LED lighting, e-motors and DC power converters to the automotive business who require thinner dielectrics and higher thermal conductivity," said Mark Goodwin, COO Europe & USA. "The benefit of copper over aluminum is that it has significantly better thermal conductivity than aluminum, which in certain applications can more than compensate for weight and cost disadvantages and give better performance as an overall package."

About UL                                       

UL fosters safe living and working conditions for people everywhere through the application of science to solve safety, security and sustainability challenges. The UL Mark engenders trust enabling the safe adoption of innovative new products and technologies. Everyone at UL shares a passion to make the world a safer place. We test, inspect, audit, certify, validate, verify, advise and train and we support these efforts with software solutions for safety and sustainability. To learn more about us, visit www.ul.com.

About Ventec International

With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, visit www.venteclaminates.com.

Share

Print


Suggested Items

Microvias: Links of Faith are Not Created Equally

07/18/2019 | Jerry Magera and J.R. Strickland, Motorola Solutions Inc.
Microvias connect adjacent copper layers to complete electrical paths. There are copper-filled microvias, which can be stacked to form connections beyond adjacent copper layers, and staggered microvias, which stitch adjacent copper layers with paths that meander on the layers between the microvias. This article discusses the various laser-drilled microvias and presents SEM photographs to begin the search for the root cause of weak copper interface.

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

An Examination of Glass-fiber and Epoxy Interface Degradation in Printed Circuit Boards

07/12/2019 | Bhanu Sood, Michael Osterman, and Michael Pecht, Center for Advanced Life Cycle Engineering
Multilayer organic laminates, which make up over 90% of the interconnecting substrates in electronics (standard FR-4 represents 85% of the substrates used for laminates), can develop a loss of electrical insulation resistance between two biased conductors due to conductive filament formation.



Copyright © 2019 I-Connect007. All rights reserved.