Ucamco Releases New Version of Gerber File Format Specification


Reading time ( words)

The Gerber file format specification has been upgraded to version 2017.05 and is available on the Ucamco . A new section is added containing guidelines on the use of attributes in fabrication data and info on how to define the PCB profile.

About Ucamco

Ucamco (formerly Barco ETS) is a market leader in PCB CAM software, photoplotting and direct imaging systems, with a global network of sales and support centers. Headquartered in Ghent, Belgium, Ucamco has over 25 years of ongoing experience in developing and supporting leading-edge photoplotters and front-end tooling solutions for the global PCB industry. Key to this success is the company's uncompromising pursuit of engineering excellence in all its products. Ucamco also owns the IP rights on the Gerber File Format through its acquisition of Gerber Systems Corp. (1998).

To download the new Gerber spec, click here

Share

Print


Suggested Items

Dissecting the IPC Regional Survey on PCB Technology Trends

07/15/2019 | I-Connect007 Editorial Team
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.

Conventional Exposing: Direct Imaging Solder Mask

07/04/2019 | Nikolaus Schubkegel
When you compare direct imaging of solder mask with contact exposure of solder mask, the positive aspects and the advantages are clear. Without a doubt, direct imaging shortens the throughput time and eliminates artwork production. It also eliminates the costly measurement of the panels and manufacturing of artwork with different scaling factors.

Kelvin Characterization to Accurately Predict Copper Thickness

07/01/2019 | Article by Brandon Sherrieb, Integrated Test Corporation
A few years ago at Integrated Test Corporation, we found that the reaction plan for void fallout at electrical test was ineffective and not standardized. Like many PCB manufacturing facilities (including a Sanmina shop that I used to work at), the reaction plan consisted of cross section analysis to determine the void type.



Copyright © 2019 I-Connect007. All rights reserved.