AT&S Paves the Way for Autonomous Driving and High-Speed Communication


Reading time ( words)

The automotive industry is focusing its efforts on developing solutions for autonomous driving and car-to-car communication. At the same time, the communications industry is moving towards 5G, and broadband networks are becoming ever faster. Large and complex volumes of data need to be transmitted securely in fractions of a second. Demanding applications such as these require specially developed printed circuit board (PCB) and interconnection technologies. They not only serve as an interconnecting platform for the electronic components, but also provide functions such as antennas and filters. AT&S is a world leader in this field, and has developed PCBs that deliver the required performance in the frequency range up to 80 GHz. For example, these technologies form the basis for high-performance radar components (long-range radar at 77/79 GHz) in driver assistance systems – an essential building block for autonomous driving.

High-frequency (RF) laminates are expected to see accelerating growth in the next few years, especially in vehicle radar applications and micro base stations. AT&S has evaluated materials and processes that are specifically suited to these high-speed applications, primarily with the goal of minimizing performance losses. RF signals reflect off the PCB depending on various parameters, which means that the signal impedance changes. To prevent capacitive effects of this kind, all parameters have to be precisely defined, and implemented with maximum process reliability. Critical factors for the signal impedance of high-frequency PCBs include the conductor path (trace) geometry, but particularly the layer structure and material used.

HF2.jpgTo achieve frequencies of up to 90 GHz, the dielectric constants (Dk) need to be brought below 3.0, and the loss factor (Df) to less than 0.001. For comparison, the corresponding values for standard FR4 are > 4 and > 0.015. Hence materials such as LCP, PTFE, polyamide or organic materials with special fiberglass and resin mixes are required. Losses at high frequencies can be further minimized during manufacture by applying very thin copper foils with low roughness to the PCBs. AT&S is able to offer asymmetric hybrid and sandwich structures (FR4 for the digital layer and PTFE for the high-speed layer) for PCB technologies up to frequencies of 80 GHz, for all kinds of different applications. For even higher frequencies, the company uses a homogeneous PTFE structure. In addition, optimized processes are available for filters / via shielding, controlled precision drilling, and precise, level and flat conductor paths with reduced skin effects. Shielding can be implemented with stacked or filled vias.

Based on high-speed/RF technologies from AT&S, driver assistance and radar systems for automobiles (77 GHz) and 60 GHz telecommunication systems have now been implemented. To further enhance performance, AT&S is working on hybrid solutions that combine RF layers with AT&S 2.5D technology. With 2.5D technology, defined cavities in the PCB can be used to position electronic components “deeper”, thereby giving the assembled PCB a thinner overall structure. Finally, in another process, embedded components are combined with the RF design. 

AT&S Austria Technologie & Systemtechnik Aktiengesellschaft - First choice for advanced applications

AT&S is the European market leader and one of the globally leading manufacturers of high-value printed circuit boards and IC substrates. AT&S industrialises leading-edge technologies for its core business segments Mobile Devices, Automotive, Industrial, Medical and Advanced Packaging. AT&S has a global presence, with production facilities in Austria (Leoben and Fehring) and plants in India (Nanjangud), China (Shanghai, Chongqing) and Korea (Ansan, near Seoul). The company employed an average of 9,526 people in the financial year 2016/17. For more information, click here.

Share

Print


Suggested Items

Making Materials Succeed: Past, Present, and Future Trends

05/20/2019 | Nolan Johnson, I-Connect007
Tony Senese, manager for the business development group at Panasonic EMBD, gives Nolan Johnson an overview of materials and components as well as changing business models and methods to make materials succeed and how to stay profitable.

Alun Morgan on the Future of PCB Materials

05/16/2019 | I-Connect007 Editorial Team
The I-Connect007 editorial team asked Alun Morgan, technology ambassador for Ventec International Group, to discuss materials at a high level. Our conversation delivered a detailed overview of the current state of the electronics industry.

Averatek on the Future of Additive and Semi-additive Processing

05/10/2019 | Barry Matties, I-Connect007
Averatek’s President and COO Mike Vinson talks with Barry Matties about the benefits semi-additive and additive processing can bring to the shop floor as well as some of the current challenges and limitations that continue to leave many manufacturers hesitant to implement the technology.



Copyright © 2019 I-Connect007. All rights reserved.