Performance Evaluation of Thin-Film Embedded Resistors
July 24, 2017 | Dora Yang, PCBCartEstimated reading time: 1 minute
Thin-film microstrip circuits have been widely applied in microwave communications, electronic countermeasures (ECM), and aerospace applications, etc. When manufacturing thin-film ICs, it is very important to apply deposited thin-film resistor material to fabricate high-accuracy and highly stable thin-film embedded resistors. Thin-film ICs call for thin-film resistors that meet these stringent requirements:
- Square resistance should be wide enough
- Temperature coefficient of resistance should be small
- Adhesive force with substrate should be strong enough
- Thin-film resistors should feature a stable and reliable performance
- Filming should be easy and convenient
- Should be capable of handling high-temperature processing, high power and relatively wide application range.
A Brief Introduction of Embedded PCBs
The first IC invented by Jack Kilby in 1959 contained only two transistors and a resistor. Nowadays, multiple complex techniques are applied to combine tens of millions of transistors into one single PC chip. With electronic products stepping towards miniaturization and multifunction, a type of embedded passive component technology occurred to meet the increasingly higher demands. The ratio between passive components and active components is approximately 20:1, density has been gradually going up with the ratio rising. With so many passive components embedded in PCBs, the area of an SMT circuit board shrinks by 40% compared to board fabricated through embedded technology.
To read this entire article, which appeared in the June 2017 issue of The PCB Design Magazine, click here.
Suggested Items
Cicor Records Solid Growth in Q1
04/16/2024 | CicorThe Cicor Group continued to grow in the first three months of the year. Quarterly sales increased by 11.8% to CHF 107.3 million compared to the first quarter of the previous year (Q1/2023: CHF 96.0 million).
TT Electronics Awarded Contract with Kongsberg Defence and Aerospace
04/11/2024 | TT ElectronicsTT Electronics, a leading provider of global manufacturing solutions and engineered technologies, announced today that its Fairford UK business has been awarded a new contract with long-standing customer Kongsberg Defence and Aerospace (Kongsberg) for the production of complex cable harness solutions.
Cicor Successfully Completes Acquisition of TT Electronics IoT Solutions Ltd.
04/03/2024 | CicorThe Cicor Group has successfully completed the acquisition of TT Electronics IoT Solutions Ltd. with three production sites in the UK and China.
Absolute EMS Successfully Recertifies ISO 9001:2015 and AS9100 Standards
03/26/2024 | Absolute EMS, Inc.Absolute EMS, Inc., an award-winning EMS provider of turnkey contract manufacturing services, is proud to announce the successful recertification of its ISO 9001:2015 and AS9100 Rev D SAE International Aerospace Standards.
Arlon EMC Receives IPC-4101 QPL Recertification
03/20/2024 | Arlon Electronic MaterialsArlon Electronic Materials has successfully completed an intensive two-day recertification audit by IPC Validation Services that examined Arlon’s manufacturing processes and testing procedures to assure that they are in conformance to the requirements of IPC-4101E-WAM1, the Specification for Base Materials for Rigid and Multilayer Printed Boards.