Nine Dot Connects Webinar: What Qualifies a Circuit as High Speed?


Reading time ( words)

Technologists at Nine Dot Connects have been asked the following question many times: "What's the frequency in which a design is considered to be high speed?" Would it surprise you to know that a 10 MHz design which could be wire wrapped or placed on a protoboard could constitute high speed? The fact is, frequency is only a part of the story.

The bigger question is, "What factors qualify the circuit as high speed?" Issues such as EMI, crosstalk, receiver noise floor, and signal propagation all come into play. It is not just a matter of avoiding or mitigating these issues; it's about optimizing the communication path.

This August 30 webinar will focus on exactly what qualifies a circuit as high speed. Sean Kelly, who has provided several introductory webinars on the topic of high speed in the recent past, will be presenting.

Date/Time

Wednesday, August 30, 2017 at 11 am (PDT) / 2 pm (EDT) 

To Register

For more information, or to register, click here. Attendees can also enjoy previously recorded webinars saved on the Nine Dot Connects website.

Share

Print


Suggested Items

DFM 101: PCB Materials

04/30/2021 | Anaya Vardya, American Standard Circuits
One of the biggest challenges facing PCB designers is understanding the cost drivers in the PCB manufacturing process. This article is the first in a series that will discuss these cost drivers (from the PCB manufacturer’s perspective) and the design decisions that will impact product reliability.

John Watson Discusses His Favorite Career Moments

12/25/2020 | I-Connect007 Editorial Team
As we celebrate the holidays after a tumultuous year, it’s important to remember all of the good things in our lives. In this short video, Altium’s John Watson discusses a few of the moments that really stand out in his career: earning his IPC Certified Interconnect Designer credentials and designing his very first circuit board.

Flexible Circuit Technology Workshop #5 Tackles Structures, Applications, Materials, and Manufacturing Processes: Think and Plan in Three Dimensions!

10/01/2020 | I-Connect007 Editorial Team
In just 15 minutes, flex expert Joe Fjelstad will teach you about implementing this useful technology into your manufacturing operation. Joe suggests you start with defining your end-product requirements and understanding cost and product life cycle expectations, as well as end-user needs. He further addresses the many considerations with adopting this useful technology.



Copyright © 2021 I-Connect007. All rights reserved.