Rogers Brings Latest Circuit Materials & Material Design Insights to EDI CON USA 2017

Reading time ( words)

Rogers Corporation will be participating at the 2017 Electronic Design Innovation Conference (EDI CON USA 2017) September 12-13, as part of a well-rounded technical program and exhibition. Taking place at Boston’s Hynes Convention Center, EDI CON USA 2017 is a technical conference and exhibition geared for designers of high-frequency analog and high-speed digital circuits and systems.

Now in its second year, the event serves a wide range of applications including automotive electronics, commercial wireless and wired communications, industrial electronics, medical electronics and military electronics. EDI CON USA 2017 provides visitors with an opportunity to learn more about the fastest-growing segments of these applications, such as 4G/5G wireless systems and Internet of Things (IoT) devices and networks.

Rogers Corporation’s Advanced Connectivity Solutions (ACS) will bring its advanced circuit materials and materials technology to Boston, contributing to both the technical conference and the exhibition floor. Rogers ACS offers materials for RF, microwave, millimeter-wave and high speed digital circuits.

At EDI CON, Rogers Corp. will welcome visitors to Booth #306 to view and discuss an assortment of high-performance circuit materials, including RO1200, RO4835, RO3003, CLTE-MW, and CLTE-AT laminates.

RO1200 Laminates

Network equipment designers require high performance circuit materials with superior electrical properties for applications like IP infrastructure, High Performance Computing and Test and Measurement. Rogers RO1200 circuit materials are engineered to meet the unique electrical and thermal/mechanical demands of high-speed designs, helping to maximize data throughput and minimize latency. With a low dielectric constant (Dk) of 3.05, and a maximum dissipation factor of 0.0017 @10 GHz, RO1200 laminates provide outstanding signal integrity (SI), reduced signal skew, and reduced cross-talk. Combined with superior thermal/mechanical performance, low CTE, and a halogen-free UL 94 V-0 rating, RO1200 laminates are well suited for the most demanding high-layer-count applications.

CLTE-MW & CLTE-AT Laminates

Rogers CLTE-MW laminates are ceramic-filled, PTFE-based, woven-glass-reinforced composite materials that optimize cost and performance for the circuit designer. They are made using a spread fiberglass cloth reinforcement coupled with high filler loading to minimize high-frequency glass weave effects on electromagnetic wave propagation. CLTE-MW laminates serve markets in commercial and consumer through industrial and military applications, including amplifiers, antennas, couplers, and filters. Available thicknesses from 3 to 10 mils support the signal-to-ground spacing needed for today’s millimeter-wave designs.

CLTE-AT laminates use micro-dispersed ceramic in a PTFE-based, woven-glass-reinforced composite material and were developed to optimize the cost to performance ratio. CLTE-AT laminate building blocks are similar to CLTE-XT™ laminates and share many common benefits. Building on a 5 mil structure, this allows for consistent dielectric constant regardless of thickness. They are used in Amplifiers, Baluns, Couplers and Filters. CLTE-AT laminates serve a range of markets from Commercial and Consumer through Defense and Space.

RO3003 Laminates

5-mil-thick RO3003 laminates are ideal for loss-critical millimeter wave frequency designs where consistent circuit performance matters, such as automotive radar sensors and point-to-point microwave backhaul-communications systems. While already a benchmark for 77-GHz automotive radar sensors, RO3003 laminates feature a Dk of 3.0 and are available with 0.5- and 1-oz. rolled copper foil. They combine the very low dielectric loss of RO3003 PTFE-ceramic resin system with smooth foil resulting in high-frequency circuit materials with best-in-class insertion loss.

RO4835 Laminates

Rogers RO4835 laminates can be used for applications demanding greater stability at elevated temperatures and requiring more resistance to oxidation than standard RF thermoset materials. As part of the RO4000® hydrocarbon ceramic laminate family, RO4835 laminates offer superior high-frequency performance and low cost circuit fabrication, resulting in a low-loss material which can be fabricated using standard, low-cost epoxy/glass (FR-4) processes. RO4835 laminates utilize RoHS compliant flame-retardant technology for applications requiring UL 94 V-0 certification.

RO4835 laminates are available with Rogers’ proprietary LoPro® reverse treat copper foil. These materials are ideal for applications requiring low loss insertion characteristics. LoPro foil provides reduced electrical variability due to its smoother copper surface, maintaining consistent performance for reliable broadband signal integrity from Digital through RF and microwave frequencies.

Circuits for the Classroom

As part of the EDI CON 2017 High-Speed Digital Symposium, Rogers’ Research Fellow Allen Horn III will present “Extraction of Frequency-Dependent Dielectric Constant: Loss and conductor effects of high-speed digital laminate materials for high-speed channel simulation,” a presentation co-authored by Chris Caisse and Patricia LaFrance, also of Rogers Corp.

The Tuesday afternoon (1:00 P.M., Room 111) session will explore the different approaches used to create models of circuit materials for software simulation tools, in particular for predicting different circuit phenomena in high-speed digital circuits. The conference format includes an interactive panel which invites questions from the audience.

About Rogers Corporation

Rogers Corporation is a global technology leader in engineered materials to power, protect, and connect our world.  With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and performance apparel; and Advanced Connectivity Solutions for wireless infrastructure, automotive safety, and radar systems. Headquartered in Chandler, AZ (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, visit


Suggested Items

Plating on Silver: What’s Old is New Again

07/07/2022 | Denis Jacques, Technic Inc.
About three decades ago, immersion silver, a nitrate-based process, gained a lot of market share in the world of PCB final finishes. More economical than ENIG, flat, solderable, and conductive, it had everything going for it—everything but corrosion resistance in a harsh environment, that is. Champagne voids were also an issue, along with line reduction. But the worst drawback, the characteristic that made the part short over time, was creep corrosion. A build-up of copper sulfide salt that grows in contact with a sulfur-rich environment, heat, and moisture resulted in failures in the field. This was enough to scar the process for good.

EIPC Summer Conference 2022: Day 2 Review

06/29/2022 | Pete Starkey, I-Connect007
Örebro, Sweden on June 15 brought a bright and early start to Day 2 of the EIPC Summer Conference for those who had enjoyed the previous evening’s networking dinner, but had resisted the temptation to over-indulge or to carry on their long-awaited catch-up conversations with old friends into the small hours. All but a few were in their seats for 9 a.m., awake and attentive for Session 4 of the conference, on the theme of new process technologies, moderated by Martyn Gaudion, CEO of Polar Instruments.

EIPC Summer Conference 2022: Day 1 Review

06/28/2022 | Pete Starkey, I-Connect007
At last, a live EIPC conference and this time in the Swedish city of Örebro, “where history and contemporary culture converge,” a pleasant and convenient location for an event that included a privileged visit to the Ericsson facility in Kumla. Around 100 delegates made the journey and the Örebro Scandic Grand Hotel was an excellent conference venue for the June 14-15 conference.

Copyright © 2022 I-Connect007. All rights reserved.