Prototron Circuits to Exhibit at PCB West 2017 Conference and Exhibition


Reading time ( words)

Prototron Circuits will be exhibiting at PCB West 2017 Conference and Exhibition to be held at the Santa Clara Convention Center. The conference will be held September 12-14, while the exhibition will be on September 13.

Prototron Circuits President Dave Ryder said, “This is one of the best shows of the season as far as Prototron is concerned. PCB West gives us the chance to meet and talk with designers and engineers from both our customers and target customers, learning about their needs and challenges when it comes to quick turn prototype PCBs. By attaining this knowledge, we can help them not only meet but exceed those needs. This year is especially important since we have earned both our MIL-PRF-31032 as well as our AS 9100 Rev D, and look forward to talking to our customers about their specific needs when it comes to these quality requirements. We will also be serving free coffee outside the classrooms all week, making sure that our own technical expert Mark Thompson is there to meet the attendees and chat with them between their classes.”

Visit Prototron at their upstairs coffee bar and at Booth 419.

About Prototron

Celebrating its 30th year in business, Prototron Circuits is one of the industry leaders when it comes to High Technology Quick Turn Printed Circuits boards. Their continued outstanding performance (98%+ Quality and Delivery) has made them a true preferred source of all companies needing reliable QTA PCBs. Prototron is AS9100 certified and MIL-PRF 31032 Qualified.

Prototron has facilities in Redmond, Washington and Tucson, Arizona.

For more information click here.

Share


Suggested Items

Automation and Traceability Critical for High-Throughput Probe Testing

12/27/2017 | Barry Matties, I-Connect007
Peter Brandt, atg’s director of sales for Europe, India and Japan, joined Barry Matties at productronica to share his views on regional variations in electrical testing requirements, automation, traceability, and how to anticipate and satisfy the future demands of the market. Group general manager Dr. Jochen Kleinertz also comments on the need for close cooperation with customers to guide the R&D effort.

A Unique Norwegian Approach to Serving Customers

12/21/2017 | Patty Goldman, I-Connect007
I met a lot of interesting people at productronica, with an assortment of different products on display. Such was my visit with Oyvind Tafjord, CEO of Visitech. His purpose at the show was to meet with his customers, so nothing unusual about that. But his customers also had booths (or stands, as they call them), which is an advantage for him, as he explains here.

Ventec: Eye on the Future, with Automotive and Lighting Front and Center

12/19/2017 | Pete Starkey and Patty Goldman, I-Connect007
Ventec’s Thomas Michels and Didier Mauve sat down with I-Connect007 Editors Patty Goldman and Pete Starkey and enjoyed an upbeat and enlightening conversation. Among the topics covered were the importance of working partnerships in maintaining supply chain continuity, market drivers for thermally conductive materials, and development of enabling technologies to support the automotive electronics revolution.



Copyright © 2018 I-Connect007. All rights reserved.