-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
PCB Signal Integrity Optimization Using X-ray Metrology
October 16, 2017 | Scott Jewler, SILICON VALLEY X-RAYEstimated reading time: 1 minute
Murphy’s Law
It happens again. A new backbone router/switch build or a line card upgrade is approaching completion when something goes wrong. The system won’t operate at the targeted data rate. Deadlines are looming and the root cause of the problem is buried somewhere in a big rack of electronic components. The integrated circuits were all speed tested prior to printed circuit board assembly. There must be a problem in the system assembly, but where?
For some time, control of printed circuit board manufacturing to specification has relied primarily on coupon tests. These are time-consuming and often poorly represent the live portion of a panel, much less a population of panels. Modifications to designs, variations in line and space widths, and misalignment of layers can occur without the supplier being aware of the impact these changes have on the system’s performance. Electrical test methodologies for bare boards are difficult to maintain, expensive, and provide limited information. Engineers are left to commit large amounts of money to board builds and cloud server manufacturing and hope the PCBs perform per design.
The challenge is getting harder
As the industry moves rapidly to full deployment of 28 Gbps backplanes, many cloud hardware and PCB manufacturers are just beginning to regain confidence that what they build will work as intended. But 56 Gbps backplanes are just around the corner, or already in the driveway for some companies. And line cards are not far behind. These faster data rates require even tighter design compliance and PCB process control.
Certainly, much of this battle will be fought on the design side. Single layer routing, sacrificial vias, and other techniques can mask PCB process variation. But is this the most desirable or cost-effective solution? The time is right for a new generation of metrology tools that will enable PCB manufacturers to build better products and for network designers to unleash the performance of their products without worrying about variances in as-built boards.
To read the full version of this article which appeared in the October 2017 issue of The PCB Magazine, click here.
Suggested Items
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Europlacer Announces Introductory Promotions for 2024 IPC APEX EXPO
03/27/2024 | EuroplacerEuroplacer, a leading provider of SMT assembly solutions, is excited to announce special introductory promotions for its latest products at the upcoming 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Green Circuits Unveils Innovative Stacked Capacitors Assembly Process
03/21/2024 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, today announced a groundbreaking advancement in process engineering with the successful implementation of an innovative assembly technique for stacked capacitors.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.