Conductor Analysis Technologies Releases New IPC PCQR2 Test Patterns


Reading time ( words)

Conductor Analysis Technologies, Inc. announces the release of new IPC Process Capability, Quality and Reliability (PCQR2) test patterns. The patterns were developed by CAT with guidance from the IPC-D36 subcommittee and are used by OEMs to document and compare the capabilities of printed circuit board manufacturers worldwide.

The new patterns are available in 8-, 10-, 12-, 18-, and 24 -ayer designs and provide more insight into complex microvia structures, including stacked and staggered, than previous designs. Additionally, the new patterns require only 12 panels to be manufactured per submission, a 20% reduction.

About Conductor Analysis Technologies, Inc.

Conductor Analysis Technologies, Inc. is a provider of market-critical data utilized by designers, purchasers, assemblers, and manufacturers of printed circuit boards. Founded in 1994, our products and services provide a standardized, independent, and documented evaluation of printed manufacturing capability, quality, and reliability. For more information, click here

Share


Suggested Items

PCBs Are Moisture-Sensitive Devices

09/07/2018 | Richard Heimsch, SUPER DRY
Research by SMT & Hybrid GmbH (now SMT Elektronik) was conducted just prior to the original publication of IPC-1601, which now provides detailed guidelines for the packaging and storage of PCBs, both from the PCB manufacturer and at the assembler’s manufacturing floor.

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.

IMPACT on DIVSYS and NWSC Crane

08/21/2018 | Patty Goldman, I-Connect007
I-Connect007's Patty Goldman has known DIVSYS’ Stan Bentley for many years, having met when the company was called Diversified Systems and they made circuit boards and finished products at their facility in Indianapolis. They saw each other at IMPACT recently, and of course had to have a chat.



Copyright © 2018 I-Connect007. All rights reserved.