atg Luther & Maelzer to Exhibit at productronica 2017


Reading time ( words)

atg Luther & Maelzer will exhibit the new, fully automated A8a flying probe test solution at the upcoming productronica show scheduled to take place November 14 - 17, 2017 in Munich, Germany.

The recently launched A8a Automatic Bare Board Flying Probe Test System provides the flexibility of flying probe test while delivering high throughput. The A8a is atg Luther & Maelzer’s latest innovation with double shuttle automation for zero product exchange time. The A8a can significantly contribute to the profitability of our customers by combining flexibility and highest test speed on a very compact foot print.

About productronica

The world’s leading trade fair productronica, which takes place at the Messe München trade-fair center from November 14–18, 2017, will show what the future of electronics development and production will look like. Besides robotics and miniaturization, the fair’s focal points include semiconductor solutions and digitalization.

About atg Luther & Maelzer

With more than 170 employees worldwide, atg Luther & Maelzer is the leading supplier of electrical testing solutions for the Printed Circuit Board industry. atg Luther & Maelzer offers two product lines:  flying probe and universal grid testers.

atg Luther & Maelzer is a company of Xcerra™ Corporation, which provides capital equipment, interface products, and services to the semiconductor, industrial, and electronics manufacturing industries. Xcerra Corporation offers a comprehensive portfolio of solutions and technologies, and a global network of strategically deployed applications and support resources. Additional information can be found at www.atg-LM.com and www.Xcerra.com

Share


Suggested Items

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.

Thermal Capabilities of Solder Masks: How High Can We Go?

08/24/2018 | Sven Kramer, Lackwerke Peters
This article focuses on three different coating material groups that were formulated to operate under high thermal stress and are applied at the printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications.

Study on Application of Four-Wire and Four-Terminal Flying Probe Test Scheme

08/10/2018 | Jin Erbing, Joint Stars Technology Co., Ltd
With the four-wire and four-terminal flying probe test method, voids in the holes formed in the PCB due to process differences, thin copper, and poor conduction due to residual adhesive after laser drilling of the HDI board can be detected, and the circuit board guide can be solved. With the development of multilayer, high-density PCB layout, four-wire four-terminal flying probe testing will play an increasingly important role.



Copyright © 2018 I-Connect007. All rights reserved.