Matrix USA Introduces New Electrostatic Panel Cleaner


Reading time ( words)

Matrix USA has launched a new electrostatic panel cleaner. The new system can be used in several PCB processes to remove loose surface debris using “no-touch” electrostatic neutralizers and high-pressure air knives. Most importantly minimal maintenance and no consumables will be required.

“Cleanliness is playing a more significant role in the PCB manufacturing success.  Due to the continuing miniaturization of circuit features, it is now essential that dust, dirt and human touch be eliminated from the process.  Many uses in the PCB shop will include film lamination, direct imaging, sm application, legend application, and layup panels, including copper, prepregs, and CCL laminates where applicable,” says Fred Long, business development with Matrix.

For more information about the products, click here.

About Matrix USA Inc.

Committed to the motto, “Quality Products, Dependable People”, Matrix was established in 1977 with the objective of providing quality raw materials to the North American printed circuit board industry. Matrix has four rapid-response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information, click here.

Share


Suggested Items

More Than a Word: Solder Mask

08/15/2018 | Patty Goldman, I-Connect007
Do you spend time, as I do, musing on the language of PCBs? We have developed our own lexicon to convey as much by picture, as by word, what exactly we mean.

Calumet Electronics on IMPACT 2018

08/14/2018 | Patty Goldman, I-Connect007
This year at IMPACT Washington, DC, I-Connect007's Patty Goldman sat down with Steve Vairo and Mike Kadlec of Calumet Electronics, to get their overview on the event.

Study on Application of Four-Wire and Four-Terminal Flying Probe Test Scheme

08/10/2018 | Jin Erbing, Joint Stars Technology Co., Ltd
With the four-wire and four-terminal flying probe test method, voids in the holes formed in the PCB due to process differences, thin copper, and poor conduction due to residual adhesive after laser drilling of the HDI board can be detected, and the circuit board guide can be solved. With the development of multilayer, high-density PCB layout, four-wire four-terminal flying probe testing will play an increasingly important role.



Copyright © 2018 I-Connect007. All rights reserved.