-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
Economic Headwinds
In this issue, the biggest names in PCB manufacturing share their economic outlook for the upcoming year and beyond. As you will see, they were all bullish on our industry, but there was some apprehension as well. No one wants to get burned by another the supply chain disruption.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
AltiumLive Summit—Munich, Germany, Part 2
November 13, 2017 | Pete Starkey, I-Connect007Estimated reading time: 8 minutes
Editor's Note: To read the part 1 of this article, click here.
The second day commenced with a new product launch. “Working together is hard” it read on the screen. Statistics indicated that 33% of new products were late getting to market, of which 28% were late due to insufficient collaboration, and up to 50% of potential revenue could be lost through being late to market. Then the screen read “NEXUS makes it easy!”
Dan Fernsebner introduced Altium’s system-level design-collaboration tool, built to enable schematic, layout, MCAD, and PCB multi-board interactions between team members using a collaboration panel, and to record every action and decision as part of the design history. NEXUS was cloud-enabled and gave members of the design team access to a central database through which they could communicate directly and each view changes and accept or reject them. Whatever changes were made, the design files were immediately updated.
Fernsebner demonstrated the capability of the system with a live exercise. In his example, an end-of-life connector required to be replaced and re-positioned. Four engineers were involved: schematic design engineer, PCB designer, mechanical engineer and system design engineer. Each had the facility to interact with the cloud and push and pull the details relevant to his area of responsibility, whilst observing the consequences on every other engineer’s area. Once the changes had been made, agreed and accepted, everything was automatically updated and recorded and the task had been completed with no ambiguity and no waste of time.
The day’s first industry keynote, “PCBs for Computing Density, From Big Bang to the Automobile,” was delivered by research scientist Andreas Doering from the IBM Research Laboratory, technical design lead for the DOME microserver project, and now piloting the development of the world’s largest radio telescope for exploring the origins of the universe. He explained that DOME was a Dutch government-funded project between IBM and ASTRON in form of a public-private-partnership focusing on the Square Kilometre Array,
Even though the Big Bang was estimated to have taken place 13.8 billion years ago, there was believed to still be some evidence of its occurrence and its consequences, if there was big enough detector and a powerful enough computer to process all the data it collected, which would be more in one day than the whole internet produces in a year—although most of it would be noise. Rather than employing one enormous dish, the Square Kilometre Array would draw on more than one hundred thousand dishes and antennae spread across Africa and Australia to create a collecting area of one square kilometre. Construction was due to begin in 2018.
Based on Doering’s projections on the amount of computing capacity required to process a minimum of 14 exabytes of data per day (where one exabyte equals 1018 bytes), a conventional computer would need several gigawatts of power to drive it. So the demand was for higher computing density, higher performance per watt, and reduced complexity of systems. Enabled by the emergence of powerful embedded-processor cores, a new class of custom-designed “microserver” was in development, with non-enclosed modules comprising system-on-chip, plus DRAM, plus flash, plus power, mounted in multiples on a backplane.
The project required 21 different PCB designs, most of which had been produced on Altium Designer, and he listed the attributes of each. The switch mothercard was a 3.6 mm, 28-layer with back-drilling, six inner impedance-controlled signal layers, with shielding ground layers in-between, and four high-current power supply lanes. At its current state of development, the system consisted of a backplane for 32 compute nodes, of which eight were populated, one switch node, one management node and two storage nodes, with water-cooling. The next stage would be a unit containing two backplanes and a total of 64 compute nodes, representing 1536 cores, 1536 GB of DRAM and 64 SSDs. Besides the primary application in the Square Kilometre Array, Doering saw many potential market opportunities for microservers in scientific computing, internet-of-things, robots and autonomous vehicles.
Back to parallel technical breakout sessions: the choice was between Willem Gruter’s “Verifying your FPGA is correctly connected on a PCB,” Martin Schuster’s “Boost your Altium Design Efficiency with Templates and Shortcuts,” or Jürgen Wolf’s “Embedding Technology—Design and Layout of Printed Circuit Boards with Embedded Components in Altium.” The first two appeared to me to be experts-only advanced tutorials for professional designers. I could identify directly with embedding technology, so I chose Wolf’s session and made sure to grab a seat early because it turned out to be a standing-room-only event.
It was a good choice! Würth Elektronik product manager Jürgen Wolf gave an enlightening insight into three different embedding technologies, ET solder, ET microvia and ET flip-chip and their typical applications, with detailed manufacturing process sequences and design guidelines. He reviewed the benefits of embedding technology in terms of miniaturisation, functionality and reliability, and listed the indicators for choosing a particular technology: ET solder was suitable for active components not available as bare die, and a range of solid SMD components. ET microvia was a highly reliable assembly and packaging technology which could be used for a combination of active and passive components, provided they had copper or nickel-palladium pad metallisation. ET flip-chip was used for fine-pitch components which would otherwise have been wire-bonded. It was not appropriate for passive components.
The process flow for ET solder was to structure the innerlayer core with the SMD component footprint, then to reflow lead-free solder as in typical SMD assembly, then to laminate as a multilayer PCB and finish according to customer requirements.
The process flow ET microvia offered two options: either start with copper foil as substrate and assemble the components face-down with non-conductive adhesive, then laminate as a multilayer and make contact to the components by laser drilling, metallising and copper plating, followed by structuring of the outer layers. Alternatively, assembling the components face-up on the innerlayer core with isotropic conductive adhesive, then laser drilling, metallising, copper plating and outer layer structuring.
The process flow for ET flip-chip began with an innerlayer core structured with the flip-chip footprint, followed by flip-chip assembly using anisotropic conductive adhesive, then multilayer lamination and finishing according to customer requirements.
Wolf gave a comprehensive series of suggestions for project planning, design rules, layout, thickness tolerances and bills of materials for the embedded components, and showed with a live demonstration how Altium Designer could be used for defining the stack-up, the component layer and the component placement and orientation, together with calculation of dimensions and clearances for cavities and workarounds for designing innerlayer solder mask and solder paste images. There were particular rules about grouping of components and safe distances from edges. An in-depth knowledge of prepreg resin flow characteristics was needed to ensure void-free encapsulation.
Page 1 of 2
Suggested Items
Nihon Superior Sets New Standards in Lead-Free Soldering Technology at APEX 2024
03/13/2024 | PVANihon Superior Co. Ltd., an advanced joining material supplier, will exhibit in Booth 1325 during the 2024 IPC APEX EXPO, scheduled to take place April 9-11, 2024 at the Anaheim Convention Center in California.
Apollo Seiko Presents the Next Frontier in Non-Contact Soldering at 2024 IPC APEX EXPO
03/12/2024 | Apollo SeikoApollo Seiko, a leading innovator in soldering technology, is pleased to announce plans to showcase its latest advancements at Booth 1408 during the 2024 IPC APEX EXPO, taking place April 9-11, 2024 at the Anaheim Convention Center in California.
Essemtec Exhibiting at IPC APEX Expo at Booth 2409
03/12/2024 | EssemtecEssemtec presents its agile dispensing platform on the TARANTULA machine. The machine can be equipped with five different valves, for a comprehensive range of dispensing applications such as Solder Paste and SMT Glue, LED Encapsulation, Silver Epoxy, Dam, and Underfill.
StenTech to Unveil Cutting-Edge StenTech BluPrint™ CVD Surface Treatment at 2024 IPC APEX EXPO
03/12/2024 | StenTechStenTech® Inc., a leading global company specializing in SMT Printing Solutions, will introduce the new StenTech BluPrint™ Chemical Vapor Deposited (CVD) Surface Treatment at the 2024 IPC APEX EXPO.
Revolutionizing Soldering: Kurtz Ersa to Debut Cutting-Edge Lineup at APEX
03/12/2024 | Kurtz ErsaKurtz Ersa Inc., a leading supplier of electronics production equipment, is pleased to announce plans to showcase its latest advancements and a range of cutting-edge soldering machines at the 2024 IPC APEX EXPO.