Video from productronica 2017: Karel Tavernier on Ucamco's New Communic8tor


Reading time ( words)

European Editor Pete Starkey and Ucamco Managing Director Karel Tavernier discuss Ucamco’s cloud-based Communic8tor platform which facilitates two-way communication between the CAM engineer and the PCB designer, or any other party involved in the manufacturing process. This gives real-time access to image data and annotations, enabling queries to be resolved, changes to be approved, and a full communications history to be maintained.

 

Watch this interview:

Click here for more coverage from productronica 2017.

Share




Suggested Items

Designing PCBs With Additive Traces

04/28/2022 | Tomas Chester, Chester Electronic Design
Advances in technology have been clear to see within the component packaging industry, as the ball grid array (BGA) package sizes reduce from 1.0 mm pitch to 0.8 mm, 0.4 mm, and even beyond. However, while these improvements have occurred with component packages, it has become increasingly more difficult to break out and route the dense circuitry associated with these parts. Currently, the high-density interconnect (HDI) method typically used for the breakout of such parts has been to create the smallest possible subtractive-etched traces with microvias to allow for connections and escapes on the innerlayers of your PCB.

Strategizing a Design Education Plan With John Watson

03/24/2022 | Andy Shaughnessy, Design007 Magazine
Altium’s John Watson is a veteran PCB designer and instructor, as well as a Design007 columnist. He also recently accepted a professorship at Palomar College in San Marcos, California, teaching basic and advanced PCB design. John and I recently discussed his thoughts on setting up a PCB design education strategy, the need to continue your design education for your entire career, and the kind of attitude that makes someone a successful PCB designer.

DFM 101: Plating Methods

02/28/2022 | Anaya Vardya, American Standard Circuits
One of the biggest challenges facing PCB designers is not understanding the cost drivers in the PCB manufacturing process. This article is the latest in a series that will discuss these cost drivers (from the PCB manufacturer’s perspective) and the design decisions that will impact product reliability. There are two methods of plating copper on PCBs—pattern plating and panel plating. The panel plating method eliminates most of the copper plating distribution issues, but because it adds copper thickness to the base layer, it makes maintaining fine line definition and consistency difficult.



Copyright © 2022 I-Connect007. All rights reserved.