-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Bay Area Circuits Updates InstantDFM Tool
November 29, 2017 | Andy Shaughnessy, PCB Design007Estimated reading time: 4 minutes
Bay Area Circuits is on a quest to help PCB designers and design engineers. For the past few years, the company has been holding facility tours and open house events to help designers understand more about the fabrication process. Now, Bay Area Circuits has upgraded its free design tool, InstantDFM.com, which allows customers and non-customers alike to check manufacturability and request pricing of their jobs.
At PCB West, I spoke with President Stephen Garcia and COO Brian Paper about the new tool update, and some of the other services they offer for PCB designers.
Andy Shaughnessy: I'm here at PCB West with Stephen Garcia and Brian Paper from Bay Area Circuits. Stephen, why don't you start off telling us a little bit about the company and then about your latest tool upgrade?
Stephen Garcia: Our company was founded in 1975 but we’re now entering the fourth year since we relocated to a larger facility in Fremont, California. Being located in the heart of Silicon Valley surrounded by product development companies, our real focus has become quick-turn prototype manufacturing. Since the move, we’ve made significant investments in technology to not only keep pace with customer requirements, but also to reduce processing time and speed delivery. Most recently, we took delivery of a second Excellon Intelli-Drill system, which really strengthens our drilling capacity and capability.
Shaughnessy: So, tell me a little bit about this DFM tool upgrade. It's been out for a little while.
Garcia: InstantDFM.com launched in 2014, and allows users to upload their PCB design data and receive a free design for manufacturability report. Of all the free design tools and educational resources we offer on our website, InstantDFM is by far the most popular. That said, some users found that the DFM feedback provided was too cryptic; the information made sense to us, the manufacturer, but wasn’t always understood by the user. So, we set out to improve the feedback mechanism and just prior to PCB West, we released the first major update to the tool, providing easier-to-understand, actionable design intelligence.
Additionally, we’ve added functionality that displays for the user how their design lines up with our standard and advanced capabilities. This becomes helpful during the design process because users are now aware of the capabilities needed to fabricate their design, providing them the opportunity to make cost-saving design adjustments wherever possible. We’ve also added the ability for the user to view each layer of the design, which can really help identify any design software-to-manufacturing software translation issues.
Ultimately, we’re trying to put more information in the hands of the designer, and the fact that InstantDFM is free and completely automated means that users aren’t beholden to normal business hours to receive a design for manufacturability report.
Shaughnessy: It's nice that people who aren't necessarily customers get to use it.
Brian Paper: Providing free design tools and resources to the designer community has become part of our company’s DNA. As a manufacturer, we have so much pent up knowledge that it seems unfair to keep it to ourselves. We do our best to share this knowledge by distributing design tools, white papers, blog posts, and, by offering frequent facility tours that give designers a chance to better understand the fabrication process. Ultimately, our hope is that these resources help us establish ourselves as industry experts and attract a growing customer base.
Shaughnessy: That's a great idea. A good facility tour helps establish you all as experts in their minds.
Paper: The company has been in operation for more than 40 years so we’ve obviously acquired a lot of PCB manufacturing expertise. But, we’ve also found that many experienced PCB designers have never taken the time to tour a manufacturing facility. By offering tours to designers, we’re able to better explain the fabrication process and provide them with valuable design feedback and cost-saving advice. We always find tours to be a win-win scenario for both parties.
Garcia: Tours are also helpful in terms of educating customers about recent equipment investments and what those additions mean to them in terms of technology and capability improvements. After all, customer demand really drives our technology investments. And as a quick-turn manufacturer, it’s really important for us to have redundancy throughout the process. As you might imagine, building a PCB in 24 hours doesn’t leave much room for equipment downtime.
And, based on customer deadlines, these types of turn times are not abnormal. Just last week, a customer contacted us on a Monday and said they needed a fully assembled board in hand by Friday. They literally sent us a scan of a napkin, and in three days we handled the design, PCB fabrication and assembly, delivering the project to them by the Friday deadline. So that’s the world we now live in and we’re going to continue to support that speed of innovation.
Shaughnessy: Sounds good. Thanks for your time today.
Garcia: Thank you.
Sponsored Links:
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.