December Edition of The PCB Magazine is Now Available


Reading time ( words)

The December issue of The PCB Magazine has published and is now available.

Thermal Management: Keeping off the hot seat

Increasing consumer demands for high performance and the need for high reliability in sectors such as automotive, LED lighting and renewable energy mean that thermal management is now front and center on the priority list for PCB manufacturing. This month, industry experst are in the hot seat to explain how to keep everything cool.

Read all about it this month in The PCB Magazine, now on the PCB007 virtual newsstand and available for delivery in your e-mailbox each month by subscribing here.

You can also download the pdf version to your devices for future reference.

Share


Suggested Items

Getting the Heat Out

01/12/2018 | Patty Goldman, I-Connect007
Increasing consumer demands for high performance and the need for high reliability in sectors such as automotive, LED lighting, and renewable energy mean that thermal management is now front and center on the priority list for PCB manufacturing.

Ventec Shares Their Insights on the Laminate Market, Part I

09/12/2017 | Barry Matties, I-Connect007
I-Connect007’s Barry Matties sat down with the COO of Ventec USA/Europe, Mark Goodwin, to discuss the laminate market as a whole, the market segments behind that growth, and how Ventec has positioned itself in the thermal management space.

Electroplated Copper Filling of Through-holes: Influence on Hole Geometry

02/07/2017 | Ron Blake, Andy Oh, et al.
The process consists of a two-step acid copper plating cycle. The first step utilizes periodic pulse reverse (PPR) electroplating to form a conductive copper bridge across the middle of a through-hole and is followed by direct current electroplating to fill the resultant vias formed in the bridge cycle.



Copyright © 2018 I-Connect007. All rights reserved.