Panasonic and Matrix Complete Outgassing Tests for Flex Materials


Reading time ( words)

Panasonic Flex materials and Matrix Flex Coverlay materials have passed the ASTM E595-15 outgassing test. The part numbers included in this certification include:

Panasonic_Matrix.jpg

Bob Berg, Matrix VP of sales, said, “Many of our customers make flex circuits that go into space applications, and a key test to qualify materials in space is the ASTM E595-15 outgassing test. This is a very stringent requirement and passing this test ensures that Panasonic Flex and Matrix Plus coverlay materials qualify for applications used in the deep vacuum of space.”

About Matrix USA Inc.

Committed to the motto, “Quality Products, Dependable People,” Matrix was established in 1977 with the objective of providing quality raw materials to the North American Printed Circuit Board Industry. Matrix has four rapid-response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information, click here.

About Panasonic

Panasonic Corporation is a worldwide leader in the development and engineering of electronic technologies and solutions for customers in residential, non-residential, mobility and personal applications. Since its founding in 1918, the company has expanded globally and now operates over 500 consolidated companies worldwide, recording consolidated net sales of 7.74 trillion yen for the year ended March 31, 2014. Committed to pursuing new value through innovation across divisional lines, the company strives to create a better life and a better world for its customers. For more information, click here.

Share

Print


Suggested Items

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.

How to Feed Test Data Back to Engineering for Process Improvement

08/01/2019 | Todd Kolmodin, Gardien Services
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.

Kelvin Characterization to Accurately Predict Copper Thickness

07/01/2019 | Article by Brandon Sherrieb, Integrated Test Corporation
A few years ago at Integrated Test Corporation, we found that the reaction plan for void fallout at electrical test was ineffective and not standardized. Like many PCB manufacturing facilities (including a Sanmina shop that I used to work at), the reaction plan consisted of cross section analysis to determine the void type.



Copyright © 2019 I-Connect007. All rights reserved.