PNC Inc. Invests in MIRTEC 3D AOI System


Reading time ( words)

PNC Inc. has recently come to an agreement with MIRTEC to purchase the MV-6 OMNI 3D AOI system. To be used in their assembly division, this purchased has bolstered their state-of-the-art equipment list even further.

The award-winning MV-6 OMNI 3D AOI machine is configured with MIRTEC’s exclusive OMNI-VISION 3D Inspection Technology which combines our 15-megapixel CoaXPress camera technology with MIRTEC’s revolutionary digital multi-frequency Quad Moiré 3D system in a newly designed cost-effective platform. MIRTEC’s 15-megapixel CoaXPress vision system is a proprietary camera system designed and manufactured by MIRTEC for use with our complete product range of 3D inspection systems. MIRTEC’s digital multi-frequency Quad Moiré Technology, provides true 3D inspection using a total of four programmable digital Moiré Projectors to yield precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow.

Fully configured, the new MIRTEC MV-6 OMNI machines feature four 10-megapixel side-view cameras in addition to the 15-megapixel top-down camera. There is little doubt that this new technology has set the standard by which all other inspection equipment is measured. MIRTEC will have two MV-6 OMNIs on display, one configured with a 10um lens for high-performance applications and the other with a 15um lens for high-speed applications.

“With the volume of orders we have been receiving and the growth PNC has shown in 2017, we thought this purchase was the right step forward for next year,” explain PNC Inc. President Sam Sangani. The MV-6 was recently awarded numerous honors for its performance across the globe. This, in addition to other key contributors such as its efficiency and flexibility were some of the reasons PNC’s leadership decided on making this their next equipment purchase.

About PNC Inc.

PNC Inc. is located in Nutley, NJ and is one of the country’s leading providers of rigid, rigid-flex and flex PCB’s and the largest of their kind in the region. After adopting the Total Concept philosophy, PNC is now able to provide customers with PCB design, fabrication and assembly solutions all under one roof. They are a one-stop shop for all things related to PC boards. They are continuously expanding their extensive list of state-of-the-art equipment while maintaining a focus on energy and cost efficiency in order to provide the best product at the best price possible.

PNC Inc.’s ownership recently acquired Accurate Engineering Inc. in Sun Valley, CA. AEI’s primary focus is on high quality flex and rigid-flex PC boards for highly complex applications including aerospace and defense. Their customers include Northrop Grumman, Boeing, Lockheed Martin, NASA and Raytheon.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.