Webcast on Troubleshooting PCB Defects


Reading time ( words)

RBP Chemical Technology will be holding a webcast on January 9, 2018 on troubleshooting printed wiring board defects. Led by Mike Carano, RBP Vice President of Technology and Business Development, this webcast series will explore the most intricate factors of advanced problem solving of printed circuit board defects and how the interrelationship of both up and downstream processes contribute to scrap product.

Defects, such as interconnect separation, delamination, wedge voids, plating folds, microvoids, surface pitting, and hole wall pull-away, carry significant costs. Many are difficult to solve because the root cause may not be readily apparent and multiple factors may contribute.

The webcast will discuss innerlayer surface preparation and imaging, including cleaning, resist lamination, exposure and developing, and fine line etching; lamination and related defects; and drilling issues and the effects on plating quality.

For more information or to register, click here.

Share


Suggested Items

Atotech Brings World-Class AHDI to the U.S.

12/06/2018 | I-Connect007 Editorial Team
During our walk-through of the GreenSource Fabrication facility with VP Alex Stepinski, he started the conversation on surface preparation and plating by saying, “We have Atotech horizontal production technology in place here. We’ve been running Atotech turnkey solutions for a while.

Increasing Productivity for Flex Fabricators

11/14/2018 | I-Connect007 Editorial Team
Barry Matties and Nolan Johnson of I-Connect007 met with Shane Noel and industry veteran Mike Jennings of ESI to discuss the introduction of their CapStone laser tool, a product aimed at doubling their flex circuit fabricators’ throughput. Mike also shares advice for fabricators who are looking to move into the ever-growing flex market.

Study on Application of Four-Wire and Four-Terminal Flying Probe Test Scheme

08/10/2018 | Jin Erbing, Joint Stars Technology Co., Ltd
With the four-wire and four-terminal flying probe test method, voids in the holes formed in the PCB due to process differences, thin copper, and poor conduction due to residual adhesive after laser drilling of the HDI board can be detected, and the circuit board guide can be solved. With the development of multilayer, high-density PCB layout, four-wire four-terminal flying probe testing will play an increasingly important role.



Copyright © 2018 I-Connect007. All rights reserved.