Aismalibar North America to Exhibit at Strategies in Light


Reading time ( words)

Aismalibar will exhibit at the Strategies in Light trade show in Anaheim, California on February 13-15, 2018. Strategies in Light is the leading LED and lighting event in North America and has been for more than 15 years. Aismalibar North America can be found at booth 328 and encourages all to come see their cutting edge thermal management solutions.

Aismalibar will be showcasing their newest high technology Insulated Metal Substrate - Cobritherm Ultra-Thin. Aismalibar developed Ultra-Thin with a dielectric layer thickness of only 35 microns that provides higher thermal performance and excellent working temperatures. This product is well suited for high end LED applications.

In addition, Aismalibar will be featuring FASTHERM. This product is used to achieve a faster thermal transition from the LED thermal pad to the heat sink. This technology allows LEDs operate at a temperature 30°C to 50°C lower due to the direct thermal transition from the thermal pad to the heat sink. This superior thermal transition can be achieved by using the entire COBRITHERM HTC product range with either a copper or copper/aluminium base.

About Aismalibar

Aismalibar is a manufacturer of copper clad laminates who produces high quality base materials for the PCB industry. Our products provides superior thermal management through high thermal conductivity, low thermal impedance and high dielectric capacity.  AISMALIBAR was one of the first IMS laminate manufacturers in the world and was the first in Europe. AISMALIBAR is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm ® is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. AISMALIBAR has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.

Share

Print


Suggested Items

Vertical Conductive Structures, Part 3: Design Tool Techniques

08/23/2019 | Ed Hickey and Mike Catrambone, Cadence Design Systems, and Joan Tourné, Nextgin Technology
New vertical conductive structure (VeCS) technology can reduce layer count and improve signal integrity without the need for sequential technologies. VeCS is different than traditional through-hole vias, microvias, and ELIC designs, which are more expensive and require a high number of laminations, drilling, and plating cycles to build up a reasonable number of layers.

Solder Mask Curing: UV Bump Overview

08/19/2019 | Nikolaus Schubkegel
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.

Avoiding CAF Failures at the IPC High-reliability Forum

12/31/1969 | Andy Shaughnessy, I-Connect007
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.



Copyright © 2019 I-Connect007. All rights reserved.