Rogers Launches Low-Loss Laminates, Bonding Materials, and Foils


Reading time ( words)

Rogers Corporation has introduced a set of next-generation products designed to meet the existing and emerging needs of advanced millimeter wave multilayer designs.

RO4835T laminates, offered in a 2.5 mil, 3 mil and 4 mil core thickness, are 3.3 Dk, low-loss, spread glass reinforced, ceramic filled thermoset materials designed for inner-layer use in multilayer board designs, and complement RO4835 laminates when thinner cores are needed. Secondly, RO4450T™ Bonding Materials are 3.2-3.3 Dk, low loss, spread glass reinforced, ceramic filled bonding materials that were designed to complement RO4835T and the existing RO4000® laminate family, and come in 3 mil, 4 mil or 5 mil thicknesses. Lastly, CU4000 and CU4000 LoPro Foils are sheeted foil options for designers looking for foil lamination builds, and provide good outer layer adhesion when used with RO4000 products.

RO4835T laminates and RO4450T bonding materials exhibits excellent Dk control for repeatable electrical performance, a low z axis expansion for plated through hole reliability, and are compatible with standard epoxy/glass (FR-4) processes. These materials are an excellent choice for multilayer designs requiring sequential laminations, as fully cured RO4000 products are capable of withstanding multiple lamination cycles. RO4835T laminate and RO4450T bondply have the UL 94 V-0 flame retardant rating, and are compatible with lead-free processes.

About Rogers Corporation

Rogers Corporation is a global leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, internet connectivity, and safety and protection applications, as well as other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification and alternative energy; Elastomeric Material Solutions for sealing, vibration management and impact protection in mobile devices, transportation interiors, industrial equipment and performance apparel; and Advanced Connectivity Solutions for wireless infrastructure, automotive safety and radar systems. Headquartered in Arizona (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, click here.

Share


Suggested Items

Ventec Keeps 'Shaking Things Up' with tec-speed 20.0

09/10/2018 | Barry Matties, I-Connect007
At the EIPC summer conference, I-Connect007 Publisher Barry Matties caught up with Ventec Europe & Americas COO Mark Goodwin, who provided an update on Ventec’s new products, the current state of the company, and how Ventec is shaking things up in the materials marketplace.

The Sum of All Parts: Factors of Reliability

08/31/2018 | Sam Sangani, PNC Inc.
A popular definition of reliability is “The quality of being trustworthy or of performing consistently well.” Upfront engineering is of utmost importance in developing a design that will endure its intended life cycle. On the other hand, the manufacturing of that design is just as critical.

EIPC 50th Anniversary Conference Day 2: The Past, the Present and the Future, Pt. 2

07/10/2018 | Pete Starkey, I-Connect007
Alun Morgan wrapped-up the proceedings, thanking delegates for their attention, speakers for sharing their knowledge and sponsors for their generous support. Special thanks and good wishes to Michael Weinhold for his enormous contribution over the years, and to Kirsten Smit-Westenberg and Carol Pelzers for their calm and professional organisation and management of another superb event.



Copyright © 2018 I-Connect007. All rights reserved.