Energy Efficiency on a Roll
April 23, 2018 | KAUSTEstimated reading time: 2 minutes
A system that can recycle excess heat into electricity could help meet the increasing energy demands of a growing global population. KAUST researchers have now engineered a lightweight tubular system that can effectively harvest this abundant, clean source of energy that often goes to waste.
“This will help us address the energy crisis and environmental pollution,” says team leader Muhammad Hussain.
Heat is released into the environment by various sources, ranging from industrial machinery to everyday life objects that warm up during operation, such as electronic devices, household appliances and automotive exhaust pipes.
In a concentrated acid solution, the telluride–polymer film lifted off the substrate and spontaneously curled up into a tube.
Many scientists have attempted to harness this energy source by searching for materials that can create electricity through transforming thermal gradients or temperature differences between hot and cold zones of a system. However, existing thermoelectric materials remain inadequate for high-power generation.
Thermoelectrics hinge on materials that combine high electric conductivity with low thermal conductivity. In these materials, thermal gradients create heat flow, which causes charge carriers to diffuse through the material and produce an electric voltage.
“We are exploring all possible engineering options to augment and maintain the thermal gradient because it directly impacts thermoelectric power generation,” says lead author Devendra Singh. Their team has developed thermoelectric tubular structures of unprecedented length, extending the distance between hot and cold ends and increasing the thermal gradient. The tubes can easily be lengthened for future applications.
By adopting an approach used for sensors, battery technology and cellular vehicle applications, the researchers have invented freestanding thin films that spontaneously roll into seamless tubes under polymer-induced strain. The self-rolling films comprise a stable and easy-to-deposit telluride-containing thermoelectric alloy and a polymer acting as a stress layer.
First, the researchers successively deposited the telluride alloy and polymer layers on a silica-based substrate and consolidated the multilayered architecture by heat treatment. Next, they dissolved the substrate using a concentrated acid solution, causing the telluride–polymer film to lift off and curve up into a tube. “The film rolled upon release because of a stress mismatch between bilayer components,” explains Hussain.
Computer simulations revealed that the tube outperformed solid-rod and flat-slab analogues. Also, it displayed better area efficiency than the slab and competitive advantage compared to the heavier and more expensive rod. A proof-of-concept experiment demonstrated that a tube-based thermopile assembly generated power up to five microwatts for a temperature difference of 60 degrees Celsius.
The team is planning to develop arrays of so-called thermoelectric legs using the self-rolling tubes to optimize power generation.
Suggested Items
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Intel Announces New Program for AI PC Software Developers and Hardware Vendors
03/27/2024 | Intel CorporationIntel Corporation announced the creation of two new artificial intelligence (AI) initiatives as part of the AI PC Acceleration Program: the AI PC Developer Program and the addition of independent hardware vendors to the program.
SEMI ESD Alliance 2024 CEO Executive Outlook to Explore the Evolving RISC-V Movement and Semiconductor Design Ecosystem
03/27/2024 | SEMIKey executives from leading semiconductor EDA and IP companies will gather to discuss the latest industry trends, challenges and opportunities Thursday, May 9, in Santa Clara, California at the annual CEO Executive Outlook, hosted by the Electronic System Design Alliance (ESD Alliance), a SEMI Technology Community, and Keysight Technologies. Registration opens soon.
CentraTEQ to Showcase Wide Range of Vibration & Environmental Test Systems at Battery Tech Expo 24
03/26/2024 | CentraTEQEnvironmental and vibration test specialists CentraTEQ are excited to be exhibiting at the upcoming Battery Tech Expo, scheduled to take place at Silverstone on April 25, 2024.
SEMI 3D & Systems Summit To Spotlight Trends In Hybrid Bonding, Chiplet Design And Environmental Sustainability
03/26/2024 | SEMILeading experts in 3D integration and systems for semiconductor manufacturing applications will gather at the annual SEMI 3D & Systems Summit, 12-14 June, 2024,