Ventec Launches Dk 3.48 Ceramic-Filled Hydrocarbon Thermoset Material


Reading time ( words)

Ventec International Group Co., Ltd. has added to its extensive signal integrity laminate and prepreg range with the launch of tec-speed 20.0, a ceramic-filled hydrocarbon thermoset material designed for high frequency applications. tec-speed 20.0 combines unrivalled high-frequency performance (Dk 3.48 / Df 0.0037), superior loss characteristics and the highest reliability with fast availability and efficient delivery through Ventec’s fully controlled and managed global supply chain and technical support-network.

No More Compromises - Performance, Price and Availability

The tec-speed 20.0 (VT-870) is designed for the world's most demanding high frequency Printed Circuit Board applications such as cellular base station antennas, power amplifiers, LNB for broadcast satellites, automotive radar and RFID. With tec-speed 20.0, Ventec has responded to customer demands for a high-performance, reliable and cost-efficient high frequency material that also has a fast and efficient global delivery promise and dependable technical support.

The tec-speed 20.0 is a high-frequency laminate designed to preserve signal integrity up to high-GHz frequencies and has extremely low 3.48 dielectric constant (Dk) and 0.0037 dissipation factor (Df). By minimizing insertion losses, tec-speed 20.0 provides greater freedom to optimize copper trace widths, spacing, and PCB thickness.

Tested according to IPC-TM-650 specifications, the industry’s gold standard, tec-speed 20.0 is UL approved, reliable and durable, offering outstanding thermal performance. High glass transition temperature (Tg), high peel strength, and low CTE ensure structural integrity and reliability, in process and hardworking applications.

Now, tec-speed 20.0 is available as laminate or prepreg (VT-870PP), as standard with HTE copper foil or with HVLP (Hyper Very Low Profile) foil to attenuate passive intermodulation (PIM) effects.

The tec-speed 20.0 ceramic-filled hydrocarbon thermoset material is manufactured by Ventec using strict quality-controlled processes that are certified to AS9100 Revision D, ISO/TS16949 and ISO 9001:2015, and, like all Ventec products, is backed by a fully controlled and managed global supply chain, sales- and support-network.

About Ventec International
With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, click here.

Visit I-007eBooks to download your copy of Ventec International's micro eBook today:
The Printed Circuit Designer's Guide to...Thermal Management with Insulated Metal Substrates

Share

Print


Suggested Items

Solder Mask Curing: UV Bump Overview

08/19/2019 | Nikolaus Schubkegel
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.

Avoiding CAF Failures at the IPC High-reliability Forum

07/31/2019 | Andy Shaughnessy, I-Connect007
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.

Focusing on Surface Sensitivity for Reliability

07/26/2019 | Andy Shaughnessy, I-Connect007
At the recent IPC High-Reliability Forum and Microvia Summit, Customer Applications Scientist Elizabeth Kidd and Sales Engineer Alex Bien, both of BTG Labs, discuss with Andy Shaughnessy their presentation on the challenges of working with highly sensitive surfaces, such as the risk of contamination. They also talked about the various surface characterization techniques that BTG Labs uses to identify such contaminants.



Copyright © 2019 I-Connect007. All rights reserved.