Atotech to Present New Flex, Flex-Rigid Products at C’Tex 2018


Reading time ( words)

Atotech will showcase its latest production solutions for advanced HDI, flex, and flex-rigid PCBs in hall C1, booth AN6 at the C’Tex 2018 show. The trade show will be held in the Suzhou International Expo Center from May 16-18. Next to its product promotion at its trade show booth, the company takes part in the New Product Introduction sessions with the introduction of its new InPro THF chemistry.

On Thursday, May 17, from 2:00 to 2:40 pm, Mustafa Oezkoek, Global Product Manager for Panel and Pattern Plating at Atotech Deutschland GmbH, will present InPro THF for advanced HDI (mSAP). InPro THF provides reliable BMV filling performance at high current densities up to 3 A/dm² especially for mSAP applications in mass production. The process meets the technological and yield requirements for next generation HDI and packaging and provides pattern plating with excellent pattern distribution. It may also be used for TH filling and reduces the number of processing steps needed, thereby leading to improved reliability, productivity, and reduced costs. The three additive component system further provides excellent stability without the formation of harmful breakdown products. 

InPro THF: Current density: 3.0  A/dm², dimple < 3μm

Additional product highlights at Atotech’s booth will be Cupracid Flex / InPro Flex, an economic conformal plating solution for standard flex and rigid-flex applications, and Stanna-COF, an immersion tin for chip on film technology.

Cupracid Flex / InPro Flex

Cupracid Flex and InPro Flex are specifically designed for standard conformal flex applications. The Cupracid Flex process is for use in vertical systems with soluble anodes whereas InPro Flex can be used in systems with insoluble anodes. Even at higher current density, pattern uniformity and line shape are very good. Both processes consist of a simple two additive system and provide excellent throwing power at high current densities without any corner flattening.

Stanna-COF

Stanna-COF is the latest extension to Atotech’s already well versed immersion tin family. The application enables Chip On Film (COF) technology. With Stanna-COF, the chips are bonded straight onto the tracks necessitating a smooth and even finish. The process assures improved yields and functionality and allows for high volume reel to reel production. Stanna-COF has the potential to enhance fine line capability and provides a protective and functional final finish as demanded by this technology.

For further information on these new products, visitors to the show are invited to join Atotech’s New Product Introduction presentation or pass by the Atotech booth in hall C1 number AN6 during the C’Tex show from May 16 to 18. Local and international product specialists will be on site to discuss any question or inquiry.

About Atotech

Atotech is one of the world’s leading manufacturers of specialty chemicals and equipment for the printed circuit board, IC substrate and semiconductor industries, as well as for the decorative and functional surface finishing industries. Atotech has annual sales of USD1.2 billion (2017). The company is fully committed to sustainability – we develop technologies to minimize waste and to reduce environmental impact. Atotech has its headquarters in Berlin, Germany, and employs about 4,000 people in over 40 countries. About a quarter of all staff works in one of the four locations in Germany: Berlin, Feucht, Neuruppin, and Trebur. For more information, click here.

Share

Print


Suggested Items

American Standard Circuits' Ken Moffat on Flex and Rigid-flex Business

04/22/2019 | Patty Goldman, I-Connect007
Ken Moffat is the director of business development at American Standard Circuits, where covers a fairly broad territory from his base in Toronto throughout Canada and parts of the U.S. from east to west. In an interview with I-Connect007 at the recent West Penn SMTA Expo, Ken talks about the state of the flex and rigid-flex industry.

Staying Current on Flex Manufacturing is Smart Business

04/04/2019 | Barry Matties, I-Connect007
Brendan Hogan, managing director of smart electronics manufacturer MivaTek Global, discusses how to better design for flex, and ways designers can stay current on manufacturing technology that can impact their flex boards.

TTM on Flex and Rigid-flex PCB Challenges

03/20/2019 | Barry Matties, I-Connect007
One of the biggest bareboard manufacturers in the world, TTM Technologies has seen a recent surge in flex and rigid-flex demands from their customers. In this interview, Clay Zha, Vice President of Technology Solutions of TTM’s Mobility business unit, and VP of Corporate Marketing Winnie Ng discuss the differences in manufacturing flex versus traditional PCBs, and the increasing need for rigid-flex HDI boards.



Copyright © 2019 I-Connect007. All rights reserved.