Ventec International Group Awarded IPC-4101/40 QPL Certification


Reading time ( words)

IPC's Validation Services Program has awarded Ventec International Group, a global electronics materials manufacturing company headquartered in Suzhou, China, a second IPC-4101 Qualified Products Listing (QPL). Ventec successfully qualified their products, VT-90H and VT-901, to specification sheet 40 of IPC-4101E, Specification for Base Materials for Rigid and Multilayer Printed Boards

Ventec, which manufactures and sells polyimide and high reliability epoxy laminates and prepregs, completed an intensive two-day audit where its manufacturing practices, test methods and conformance requirements of IPC-4101 were reviewed. Ventec met or exceeded the IPCs Validation Services QPL requirements for producing base materials used by printed circuit board manufacturers in the electronics industry. As a result, the company is successfully listed as an IPC-4101 trusted source capable of manufacturing in accordance with industry best practices to specification sheets 40 and 41. Ventec and other trusted sources of suppliers can be found on IPC's QML/QPL (Qualified Product Listing) database.

Mark Goodwin, COO USA & EMEA of Ventec International Group commented, "The IPC Qualified Product Listing (QPL) of our polyimide laminate and prepreg provides an independent endorsement of the quality of our production controls and materials for use in high reliability mil/aero applications. The IPC QPL is a trusted reference list for the entire electronics supply chain and we are delighted to be the first copper clad laminate manufacturer to have a polyimide material added to the validation services listing by meeting the requirements of both the rigorous facility audit and the qualification testing program at an independent test laboratory. We are fully committed to consistently meet and exceed the strict requirements of industry standards such as IPC-4101E."   

IPC's Validations Services QPL/QML Program was developed to promote supply chain verification. It also provides auditing and certification of electronics companies' products and identifies processes which conform to IPC standards. "Ventec has differentiated itself from the competition in the polyimide market by becoming part of IPC's global network of trusted industry sources," said Randy Cherry, IPC director of Validation Services. "We are pleased to recognize Ventec for becoming a trusted supplier conforming to IPC-4101E."

For more information about IPC's Validation Services QPL/QML Program, click here.

Share


Suggested Items

More Than a Word: Solder Mask

08/15/2018 | Patty Goldman, I-Connect007
Do you spend time, as I do, musing on the language of PCBs? We have developed our own lexicon to convey as much by picture, as by word, what exactly we mean.

Calumet Electronics on IMPACT 2018

08/14/2018 | Patty Goldman, I-Connect007
This year at IMPACT Washington, DC, I-Connect007's Patty Goldman sat down with Steve Vairo and Mike Kadlec of Calumet Electronics, to get their overview on the event.

Study on Application of Four-Wire and Four-Terminal Flying Probe Test Scheme

08/10/2018 | Jin Erbing, Joint Stars Technology Co., Ltd
With the four-wire and four-terminal flying probe test method, voids in the holes formed in the PCB due to process differences, thin copper, and poor conduction due to residual adhesive after laser drilling of the HDI board can be detected, and the circuit board guide can be solved. With the development of multilayer, high-density PCB layout, four-wire four-terminal flying probe testing will play an increasingly important role.



Copyright © 2018 I-Connect007. All rights reserved.