Atotech Presenting at IPC Automotive Electronics Reliability Forum


Reading time ( words)

Atotech will participate in the IPC Automotive Electronics Reliability Forum with a presentation on “Dissipating Thermal Energy in PCBs—Solid Copper Through Via Filling." The forum will be held from June 4 to 5, 2018, in Nuremberg, Germany.

The presentation will be held today, Monday, June 4, from 11:40 to 12:20 pm, by Sven Lamprecht, Director OEM/ EMS Technology Exchange at Atotech Deutschland GmbH. “With demands for 5G and advanced driver assistant system (ADAS) radar devices two advancements will force PCBs into higher frequencies and higher speeds.  We will enjoy 5G cellular networks from telecommunication companies with wider frequency bandwidths to give us lower latencies, and faster frequencies to give us better data rates,” states Sven and continues: “Furthermore, ADAS radar devices moved their standard up from below 30GHz to 77GHz.“ In his presentation, he will explore the processes required and discuss the challenges for solid copper through via filling for PCBs up to 1mm thickness in a high volume manufacturing (HVM) tool.

Fueled by strong growth in electric vehicles and autonomous cars, as well as a dramatic increase in electronics content in conventional automobiles and trucks, automotive electronics are crucial components of engine, ignition, and transmission management, entertainment, navigation, diagnostic tools and safety systems. With the “IPC Automotive Electronics Reliability Forum,” the IPC – Association Connecting Electronics Industries – has gathered thought leaders and subject matter experts from leading electronics and automotive companies to discuss the future of automotive electronics design and manufacturing.  The forum delivers unique educational as well as networking opportunities and covers a wide breadth of relevant and timely topics. It is therefore the ideal place for Atotech to present its innovative systems and product solutions as well as its thought leadership when it comes to automotive electronics.

About Atotech

Atotech is one of the world’s leading manufacturers of specialty chemicals and equipment for the printed circuit board, IC-substrate and semiconductor industries, as well as for the decorative and functional surface finishing industries. Atotech has annual sales of USD1.2 billion (2017). The company is fully committed to sustainability – we develop technologies to minimize waste and to reduce environmental impact. Atotech has its headquarters in Berlin, Germany, and employs about 4,000 people in over 40 countries. About a quarter of all staff works in one of the four locations in Germany: Berlin, Feucht, Neuruppin, and Trebur. For more information, click here.

Share

Print


Suggested Items

The iNEMI 2019 Roadmap: Flexible Hybrid Electronics

06/04/2020 | Pete Starkey, I-Connect007
The emerging trend for “electronics on everything, everything with electronics” was the theme of iNEMI’s webinar presentation of the highlights of its recently published Flexible Hybrid Electronics Roadmap Chapter, delivered by Girish Wable, senior engineering services manager with Jabil. Pete Starkey provides an overview.

Joe O’Neil: Green Circuits Running Strong Under Current Social Restrictions

06/01/2020 | Nolan Johnson, PCB007
On May 28, Joe O’Neil, CEO of Green Circuits, updated Nolan Johnson on how the company continues to operate during the COVID-19 restrictions. O’Neil reflects on the rapid chain of events this past March when lockdowns were instituted in the San Francisco Bay area. After a brief but rapid shutdown, Green Circuits was back up and in production.

3D Additive Electronics Manufacturing: Are We Nearing an Inflection Point?

05/28/2020 | Dan Feinberg, I-Connect007
Recently, Dan Feinberg was invited to attend a detailed and broadly informative webinar by nScrypt titled “The Strength of 3D-Printed Electronics," which covered the status and advances in the use of 3D printing for electronic device design and manufacture. nScrypt is an Orlando-based company founded in 2002 that focuses on 3D printing. Here’s what Dan learned from each of the speakers.



Copyright © 2020 I-Connect007. All rights reserved.