Ventec to Invest $300K in German Service Center


Reading time ( words)

Ventec International Group Co., Ltd. is pleased to announce a $300,000 investment for its Central European facility in Kirchheimbolanden, Germany.  The plan includes an upgrade to the clean-room environment, an additional Yowshi diamond blade saw and the installation of an aluminum coil cutting line.

Following a period of sustained growth and a successful listing of Ventec International Group on the Taipei emerging stock market in January 2018, Ventec is committed to further strengthen its German facility and team in Kirchheimbolanden as part of the company’s phased and strategic investment plan across our global network of service centers.

A $300,000 investment program at the German service center has been approved for an upgraded clean room environment for prepreg panelisation and the installation of an additional diamond blade saw from Taiwanese manufacturer Yowshi, to increase laminate cutting capacity and flexibility, and shorten lead-times. Further investment is being made to the consumables business with the installation of an aluminum coil cutting line to improve capability and increase capacity for drill entry materials.

Mark Goodwin, COO EMEA & USA, said, “We are experiencing unprecedented growth at Ventec and the German business unit is central to Ventec International Group’s global supply chain strategy. In line with the growth in demand, the investment in Germany will ensure an increase of our production capability, sustained quality assurance and continued reliability of on-time material delivery by creating the capacity and flexibility to deliver on our goals, whilst at the same time committing to sustain employment at the facility in Kirchheimbolanden.”

About Ventec International

With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, click here.

Share

Print


Suggested Items

Solder Mask Curing: UV Bump Overview

08/19/2019 | Nikolaus Schubkegel
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.

Avoiding CAF Failures at the IPC High-reliability Forum

12/31/1969 | Andy Shaughnessy, I-Connect007
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2019 I-Connect007. All rights reserved.