AT&S Releases 24th Annual General Meeting Results

Reading time ( words)

On the 24th Annual General Meeting of AT&S (Austria Technologie und Systemtechnik Aktiengesellschaft), the company adopted a dividend of EUR 0.36 per no. par share entitled to a dividend for the financial year 2017/18. The ex-dividend day is 25 July 2018, the record date is 26 July 2018 and the dividend payment date is 27 July 2018.

In addition, the members of the management board and the supervisory board were granted discharge for the financial year 2017/18 at the Annual General Meeting.

Pursuant to the proposal of the management board and the supervisory board, the remuneration of the Supervisory Board for the financial year 2017/18 was set at a total of EUR 466,960.0.

PwC Wirtschaftsprüfung GmbH, Vienna, was appointed auditor of the annual financial statements and the consolidated financial statements for the financial year 2018/19.


Suggested Items

PCBs Are Moisture-Sensitive Devices

09/07/2018 | Richard Heimsch, SUPER DRY
Research by SMT & Hybrid GmbH (now SMT Elektronik) was conducted just prior to the original publication of IPC-1601, which now provides detailed guidelines for the packaging and storage of PCBs, both from the PCB manufacturer and at the assembler’s manufacturing floor.

Flex Time: Why is Rigid-Flex So Expensive?

07/11/2018 | Bob Burns, PRINTED CIRCUITS
One question that I hear fairly often, particularly after an initial quotation, is “Why is rigid-flex so expensive?” In this article, I’ll share with designers the cost drivers in rigid-flex relative to standard rigid boards and flex circuits with stiffeners. A typical rigid-flex PWB will cost about seven times the cost of the same design on a hard board, and two to three times an equivalent flex circuit with stiffeners.

Triangle Labs: Covering the Niche Market of Large Boards

05/18/2018 | Patty Goldman, I-Connect007
I recently had the opportunity to speak with John-Michael Gray, president of Triangle Labs. We had quite a discussion on their rather unique capability of building large-format PCBs and multilayers—perhaps the largest PCBs in the world.

Copyright © 2018 I-Connect007. All rights reserved.