Benefits of Low-Temp Soldering: I-007eBook Now Available


Reading time ( words)

Tired of solder joint failures? Get your head off the pillow! Learn about opportunities and solutions provided by low-temperature soldering in I-Connect007’s newest micro eBook: The Printed Circuit Assembler’s Guide to… Low-Temperature Soldering.

The Printed Circuit Assembler’s Guide to… is an ongoing book series specifically dedicated to educating PCB assemblers and serves as a go-to resource for essential assembly topics.

Written by Morgana Ribas and other expert authors from Alpha Assembly Solutions, this book provides an introduction to the evolution of modern low-temperature soldering, illustrates the importance of chemistry when developing low-temperature solders, and discusses advanced and emerging applications where lower melting point alloys can provide unique assembly solutions.

“Due to the recent burgeoning in the use of low-temperature solders within the electronics assembly industry, much has been written about bismuth- and tin-based solders and solder pastes. This book does a good job of distilling out the chaff and focusing on the most relevant, valuable information available,” says Raiyo Aspandiar, senior engineer at Intel Corporation.

Readers will learn the benefits low-temperature alloys have to offer, such as reducing costs, creating more reliable solder joints, and overcoming design limitations with traditional alloys.

Download your free copy today! You can also view other titles in our full library.

We hope you enjoy The Printed Circuit Assembler’s Guide to… Low-Temperature Soldering.

For more information, contact:

Barb Hockaday
I-007eBooks

+1-916-365-1727 (GMT-8)

Share

Print


Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

EIPC Technical Snapshot: 5G and Loss Minimisation

03/26/2021 | Pete Starkey, I-Connect007
Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

PCB Requirements for E-Mobility

03/23/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Christian Klein, section manager for PCBs in the automotive electronics division, about Bosch’s recent presentation on PCB requirements of the future in regard to automotive and electro mobility trends and challenges.



Copyright © 2021 I-Connect007. All rights reserved.