Consultation on EU’s Chemical, Product and Waste Legislation


Reading time ( words)

The European Union promotes a “circular economy” with closed-loop production based as much as possible on repairability, reusability and recycling. But in order for more products to be recycled or reused, it is crucial to tackle the challenges at the source, by ensuring that the product design facilitates recycling, and by substituting, whenever feasible, hazardous substances with suitable alternatives.

In this context, the European Commission recently asked stakeholders their opinions on the interface between chemical, product and waste legislation. The questionnaire drafted by the European Commission covers some key issues for the electronics industry, including the definition of ‘substances of concern’ and the tracking of these substances.

Based on Commission’s communication on this subject, the aim of the questionnaire is to get stakeholders’ views on four issues posing obstacles to ‘the safe uptake of secondary raw materials’ and a number of related challenges: lack of information on substances of concern in products and waste; presence of substances of concern in recycled materials; difficulties in applying end-of-waste criteria; and unclear application of EU waste classification methodologies.

This is one of the priority issues for the electronics industry in Europe, and IPC’s Senior Director of Europe, Nicolas Robin, is currently working with IPC members on a common response to the consultation. Please don’t hesitate to share your views and concerns. The deadline has been set for October 29, 2018.

The European Commission’s key Policy Officer responsible for the interface between chemical, product and waste legislation, Enrique Garcia-John, will be one of the speakers at this year’s IPC IMPACT Europe on November 28-29 in Brussels. Register now to speak directly with high level EU decision-makers, make your voice heard, and better understand future EU legislative plans.

Share

Print


Suggested Items

Case Study: Example of ASKEY Applying QML Validation

04/23/2020 | Edy Yu, I-Connect007
The PCB007 China team paid a visit to the ASKEY plant in Wujiang, Jiangsu, to learn more about their QML process. In this interview with Qixian Zhang, vice GM of ASKEY’s Electronics Product Quality Assurance Department, he discusses what QML means to ASKEY and the electronics industry as a whole.

Is Your EMS Partner Up to Speed With WEEE 'Open Scope?'

10/23/2019 | Neil Sharp, JJS Manufacturing
E-waste encompasses a myriad of "unseen" metals, semi-metals, and chemical compounds that are found inside circuit boards, wires, and electrical connections. If not handled correctly, chemicals—such as cadmium, barium, lithium, lead, mercury, and beryllium—can present a significant health risk through direct contact, the inhalation of toxic fumes, or the build-up of toxins in water, soil, and food products.

Conformal Coatings

08/01/2019 | Nolan Johnson, I-Connect007
While conformal coatings may have been something of an afterthought at the front of the design process, that can no longer be the case. Conformal coatings are now a critical part of any board assembly that might be subjected to challenging conditions. But coatings can also contribute to increased mean time between failure in any conditions, even environmentally controlled environments.



Copyright © 2020 I-Connect007. All rights reserved.