-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Catching up With Scott McCurdy and Freedom CAD
October 31, 2018 | Tim Haag, ConsultantEstimated reading time: 3 minutes
During PCB West, Scott McCurdy of Freedom CAD Services sat down with me for an interview. We discussed Freedom CAD’s latest news, some trends in PCB design software tools, and the continuing need to draw more young people into a career in PCB design.
Tim Haag: I am here with Scott McCurdy, director of sales and marketing for Freedom CAD Services in Orange County. How has the show been going for you?
Scott McCurdy: This is the third year that we've attended this show. Fortunately we got into row 4, aisle 400 this year, which is a lot better than where we were before on the outside row. Today it was busy from 10 am until the middle part of lunchtime, when things thinned out a little bit.
We have had a lot of people come by who we only see once a year, and we’ve acquired some new leads. There’s no place like Silicon Valley for the core of the PCB design world. PCB West has been doing a great show for 26 years, and it’s been run really well.
I’ve attended this conference many times individually. Freedom CAD, however, didn't start exhibiting at PCB West until we ended up deciding to leave DesignCon. We found PCB West to be more suited towards the market that we're looking for and the potential customers here.
Haag: What is new at Freedom CAD these days?
McCurdy: We are currently one of the largest independent full-service PCB design companies in north America. And we have a lot of things that we offer around the printed circuit board layout. We offer EEs who do hardware engineering up front and other engineering services such as signal integrity, power integrity and mechanical engineering. It seems like almost everything these days is very high-speed and highly constrained. We are unique in that we support the 4 most popular CAD tool flows, which allows us to accommodate most potential customers.
One things that is new for us is the increase in the number of Altium users. Here at PCB West we are enjoying talking to people and learning who else might be looking to expand their horizons with us.
I have been the president of the Orange County IPC Designers Council for 15 years, and it’s one of the largest chapters in the country. One thing that continues to be a challenge is that the designer community is getting older, and we are not replacing those seats with new recruits. I think as an industry, we need to look a little harder at how we are going to do that. I believe that’s one thing we can do at this show—help raise awareness. Somehow we need to start recruiting the next-generation designers.
Haag: I agree with that. This seems to be a common concern throughout the industry which I have run into in many different places.
McCurdy: It is the folks who are in my age group who came up laying tape, and designed boards in the early days with very slow computers and poor software solutions, but obviously we've seen that change with every passing year. It just makes it harder to learn since today’s circuit boards are extremely complicated. You're not just going to be a draftsman and enter into this field, which was the path 30 or 40 years ago. We need to find a better solution to bring the younger population into this. I don't have the answers; I'm just asking the questions. How can we do it?
Haag: I understand. Is there anything else you’d like to add?
McCurdy: No, I think that’s about it.
Haag: Thank you for your time. I appreciate you speaking with me.
McCurdy: My pleasure. It was good to see you again.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.