Aismalibar to Exhibit at electronica 2018


Reading time ( words)

Aismalibar will return to Munich this November for the 2018 electronica trade fair and conference and will proudly launch two new products: Cobritherm Ultra Thin 4W; and Cobritherm 3.2W Thin Lam and Bond Sheets.

Cobritherm Ultra Thin 4W was developed to achieve high thermal conductivity, a Tg of 180ºC by TMA and an 150ºC MOT. The Ultra Thin 4W CTE Z axis is under 1.8% from 50 to 250ºC. Industry leading Thermal conductivity, strong MOT values, High Tg and Low CTE are the key elements for performance of MPCBs operating at high temperatures. Aismalibar Ultra Thin 4W will be available for mass production beginning in November 2018.

The new Cobritherm 3.2W Thin Lam and Bond Sheets have been developed to reduce thermal resistance on multilayer PCBs. The 150ºC MOT, high Tg value (180º), 3.2W thermal conductivity and Low CTE value under 1.8% ( 50 to 250 ºc) enhances the overall thermal performance. As thermal management becomes more challenging on multilayer PCBs, Aismalibar has developed a new technology capable of significantly reducing the operating temperature of the PCBA. Cobritherm 3.2W Thin Lam and Bond sheets will be available for all types of multilayer constructions and can be cladded to standard FR4 or solid metal cores.

About Aismalibar

AISMALIBAR was one of the first IMS laminate manufacturers in the world and was the first in Europe. AISMALIBAR is proud to introduce their material to the North American market in 2012. Their product IMS Cobritherm is a qualified and recognized Insulated Metal Substrate which gives the best thermal management solutions with high thermal conductivity, low thermal impedance and high dielectric capacity. AISMALIBAR has implement a 100% proof test with 1-3KV (High Pot Test) to all IMS laminates coming out of their plant. This is the only way to insure the dialectical strength is perfect and that production problems are detected before PCBs arrive to the end user.

Visit Aismalibar at hall B1 booth 365.

Share

Print


Suggested Items

Alun Morgan on the Future of PCB Materials

05/16/2019 | I-Connect007 Editorial Team
The I-Connect007 editorial team asked Alun Morgan, technology ambassador for Ventec International Group, to discuss materials at a high level. Our conversation delivered a detailed overview of the current state of the electronics industry.

Stacked Microvia Reliability: Ongoing Work and Upcoming IPC Conference

04/24/2019 | Pete Starkey, I-Connect007
One year ago, Happy Holden's review of the 2018 IPC High-Reliability Forum reported the presentation of J.R. Strickland and Jerry Magera, who described research at MSI Applied Technology into overcoming the risk of stacked microvia failures escaping standard quality assurance procedures. Their report provided a basis for the IPC white paper IPC-WP-023, which addressed reliability issues associated with stacked microvias and included data collected from several other printed circuit manufacturers.

Ventec Focuses on High-mix Manufacturing

04/09/2019 | Barry Matties, I-Connect007
The I-Connect007 team recently toured Ventec International Group’s Suzhou factory where a modern, flexible manufacturing concept designed for fast delivery is enhancing their established volume manufacturing of specialty, high-reliability epoxy laminates and prepregs. Read on to know more about Ventec's ongoing investment in the facility to offer flexible world-class high-mix manufacturing capabilities for polyimide, thermal management, low-loss, and signal integrity material solutions.



Copyright © 2019 I-Connect007. All rights reserved.