Aluminum and FR-4 PCBs for LED Lighting from Super PCB


Reading time ( words)

Super PCB, a single source for high-quality printed circuit boards (PCBs), now offers aluminum and FR-4 PCBs for LED lighting. The company can produce both prototypes and mass production for LED lighting applications.

LED lighting has been one of the fastest growing industries in recent years. Compared to traditional lighting, LED lighting substantially reduces energy consumption. One of Super PCB’s specialties is aluminum and FR-4 PCBs for LED lighting. In addition to Bergquist materials, the company carries high quality equivalent aluminum materials with much lower costs.

PCBs for LED lighting applications can have unique shapes. Some are very long strips; some are circular. In lighting applications, many customers require the solder mask to be bright white for better reflection. Additionally, avoiding discoloration is an importnant requirement and Super PCB’s high quality white solder mask stays bright white. Super PCB has been working with one of the larget LED lighting manfufacturers in the world for years, providing a large volume of long (over 40") FR-4 PCBs for LED lighting application.

Super PCB offers USA manufacturing to support fast-turn and ITAR requirements, as well as overseas manufacturing facilities to support mass production at lower costs. The company’s manufacturing facilities are RoHS compliant, ISO 9001 and TS16949 certified, and UL-listed. Super PCB’s state-of-art equipment and technology ensures the highest quality and efficiency.

About Super PCB

Super PCB is the source for all of your high-quality PCB needs! Since 2003, the company has been providing high quality PCBs to numerous companies in a broad spectrum of industries, from consumer electronics to telecommunications, new energy, aerospace, automotive and more. Super PCB is certified to TS16949, ISO9001 and UL. For more information, click here

Share

Print


Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

EIPC Technical Snapshot: 5G and Loss Minimisation

03/26/2021 | Pete Starkey, I-Connect007
Bringing a specialised technical area into sharp focus, this month’s topic was “5G and the understanding of loss minimisation at the PCB level,” with papers on dielectric material, copper foil, and modelling solutions. The webinar was moderated by EIPC board member Paul Waldner managing director of Multiline International Europa, who admitted that he had managed to get a haircut especially for the occasion!

PCB Requirements for E-Mobility

03/23/2021 | I-Connect007 Editorial Team
Nolan Johnson, Barry Matties, and Happy Holden speak with Christian Klein, section manager for PCBs in the automotive electronics division, about Bosch’s recent presentation on PCB requirements of the future in regard to automotive and electro mobility trends and challenges.



Copyright © 2021 I-Connect007. All rights reserved.