Taiflex Posts 17% YoY Growth in FCCL Sales January-November 2018


Reading time ( words)

Taiflex Scientific Co. Ltd, a Taiwan-based supplier of flexible copper-clad laminates (FCCL) and PV module backsheets, has reported consolidated revenues of NT$884 million ($28.68 million) for November, down by 3.8% month-on-month and down by 7.5% year-on-year.

The company's Electronic Materials Industry (EM) business posted total sales of NT$754 million ($24.46 million), down by 11.6% from the previous month, but up by 11.5% year-on-year. Cumulative sales from January to November 2018 reached NT$7.863 billion ($255 million), up by 16.64% compared with the same period last year.

Taiflex's PV Industry (PV) division posted total sales of NT$128 million ($4.15 million) for November, up by 150% from the previous month, but down by 53.6% from November last year. Total sales for January to November reached NT$1.127 billion ($36.57 million), down by 68% year-on-year.

Share

Print


Suggested Items

Solder Mask Curing: UV Bump Overview

08/19/2019 | Nikolaus Schubkegel
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.

Avoiding CAF Failures at the IPC High-reliability Forum

12/31/1969 | Andy Shaughnessy, I-Connect007
Foresite CEO Terry Munson recently spoke with Andy Shaughnessy during the IPC High-Reliability Forum and Microvia Summit in Baltimore about his presentation on the causes of conductive anodic filament (CAF), the dangers of resin starvation, and what advice he'd give to PCB designers to avoid those types of failures.

A Guide to High-reliability PCBs from Design to Specification

07/24/2019 | Jeff Beauchamp, NCAB Group
Creating reliable PCBs is an outcome of considering all aspects that can affect reliability as early as possible in the design process. The further down the design process, the more expensive and risky it can be to fix. As they say, everything starts with the design. Because a good board design improves the reliability of the end product and lessens the risk of failure.



Copyright © 2019 I-Connect007. All rights reserved.