-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Shape of Things to Come: Curved, Flexible, Stretchable, and Three-Dimensional Electronics
December 27, 2018 | Corné Rentrop, HOLST CENTREEstimated reading time: 2 minutes
The seamless integration of electronics into flexible, curved, and even stretchable surfaces is being requested for several markets, such as automotive (dashboards, lighting, sensors), smart buildings (lighting facades, air quality, solar panels), medical (health patches, X-ray, analysis), and smart clothing (position tracking, sports). The requirement for products that are light, take up less space, conformable, and easily integrated into an existing design will result in an improved user interface. Additionally, the product should be robust from a cost-effective process consuming less material, and the technology should be consistent with the Internet of Things (IoT) roadmap.
The Printed Electronics Concept
Printed electronics deliver smart surfaces for applications by creating printed circuits on polymer films and utilizing traditional graphical printing techniques, such as screen printing and inkjet printing, to create the circuitry on foils in sheet or roll form.
An obvious advantage of printing electronics is the speed that can be achieved. For example, there is roll-to-roll screen printing equipment at the Holst Centre that runs at a maximum speed of 60 metres per minute, creating seamless circuits directly onto a roll (Figures 1 and 2). Photonic sintering of the metal ink allows high operating speeds to be maintained at a controlled temperature of approximately 130°C to prevent the foils from melting. In combination with roll-to-roll printing, pick-and-place assembly technology can place electrical components on the roll. Conductive adhesives are usually used as interconnects.
Crossovers and vias can be printed by alternating conducting and dielectric layers, which can maintain a PCB-like structure, only now on a roll. All polymer foil materials are suitable substrates for printed electronics. Polyes ters—such as polyethylene terephthalate (PET) and polyethylene naphthenate (PEN), rubberlike material (thermoplastic polyurethane or TPU), and even paper—are known substrates for printed electronics. The low costs of these materials immediately show the second advantage of printed electronics.
A third benefit of printed electronics is the ability to change the form factor of the PCB. Foils are easy to shape into the desired form by bending, rolling, cutting, and laminating. In this way, the electronics can be integrated easily into examples like clothing, building, and on-body applications.
The prints can also be seamless, effectively with no beginning and no end, so that the size of the PCB is limited only by the length and width of the roll. LED foils are printed at the Holst Centre with a length of 300 m and a width of 30 cm. The LED foils have a pitch of 5 cm and are used as a wallpaper lighting source for indoor applications.
To read the full version of this article which originally appeared in the October 2018 issue of Flex007 Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
IMI Welcomes New CEO
05/03/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI),The IMI Board of Directors announced, in a disclosure dated April 25, 2024, the appointment of Louis Sylvester Hughes, Chief Executive Officer (CEO).
Electronics Industry Sentiment Rose in April, Hitting New High
05/02/2024 | IPCApril 2024 marked the third consecutive month of sentiment growth among electronics manufacturers. When asked if they expected labor costs for hourly workers to rise over the next month, manufacturers in the United States, Mexico, and Europe predicted a five percent increase, while manufacturers in Asia predicted a slightly lower four percent increase.
iNEMI Names Grace O'Malley CTO
05/02/2024 | iNEMIThe Board of Directors of the International Electronics Manufacturing Initiative (iNEMI) has named Grace O'Malley Chief Technical Officer (CTO).
ZESTRON Academy Launches 2024 Advanced Packaging & Power Electronics Webinar Series
05/01/2024 | ZESTRONZESTRON, the leading global provider of high-precision cleaning products, services, and training solutions in the electronics manufacturing and semiconductor industries, proudly announces the launch of its highly anticipated webinar series on Advanced Packaging & Power Electronics, a webinar series on the latest innovations, cleaning, and corrosion challenges.