AT&S: Innovators for Electromobility and Automated Driving


Reading time ( words)

Electromobility and automated driving are the two defining trends in the automotive industry with high growth potential, but also technological challenges. For example, hybrid and/or electric powertrains require, among other things, efficient power electronics for the major subsystems such as inverters, on-board chargers or DC/DC converters. Finally, the implementation of electromobility also requires efficient, space-saving and reliable connection and packaging solutions. On the other hand, new high-performance sensor systems with sensor fusion and high-speed communication are required along the way to autonomous driving, all whilst maintaining functional safety and security. AT&S addresses all of these key automotive trends with innovative connection and packaging solutions.

Efficient Power

Electromobility continues to make headway, driven by legal requirements in all key regions – led by China. To date in the EU, the target of 95 g CO2/km has been the fleet average for 2021. According to a recent EU compromise, new cars in the EU are to emit another 37.5% less carbon dioxide by 2030 than in the comparable year 2021. This cannot be achieved without high-voltage electrification and mild hybrid vehicles with a 48V on-board power supply – and this is where efficient power electronics play a central role. AT&S expects above-average growth in electromobility applications over the next few years and is focussing here amongst other things on embedded power technologies – in other words, the embedding of power semiconductors such as MOSFETs in PCBs. Key benefits of ECP (embedded component packaging) over conventional PCB assembly include significant miniaturisation thanks to higher integration, improved reliability and superior thermal performance. In addition, ECP facilitates integrated EMI shielding and supports the adaptation of different coefficients of thermal expansion (CTE) for rapid and easy system integration.

As silicon-based solutions slowly reach their limits, the use of wide-band gap materials such as GaN promises more efficient power conversion, with higher efficiency and higher power density. Working closely with partners, AT&S has successfully reduced both the dimensions and the cost of these new components, thereby contributing to the faster adaption of the new technologies.

Automated Driving Requires High-Speed Communication and Sensor Fusion

The second megatrend in the automotive industry is automated driving. Automated or autonomous driving constitutes a great potential for the microelectronics industry. By way of illustration, the PCB market for these applications is currently growing at around 5.5% per annum. By 2020, the proportion of costs of electronic components in cars is expected to rise to 35%, and even to 50% by 2030 (source: Statista 2018).

With the increasing degree of automation and thus more sophisticated advanced driver assistance systems (ADAS), the need for sensors and different sensor technologies is also increasing in cars. Whilst a combination of camera and radar systems is sufficient up to level 2, from level 3 lidar also plays a crucial role.

Due to the ever higher frequencies such as for the radar, the traces on the circuit boards must also be regarded as RF components and designed accordingly. AT&S is a world leader in this field and has developed PCBs that deliver the necessary and also cost-efficient performance in the frequency range up to 80GHz. For example, these technologies form the basis for high-performance radar components (long-range radar with 77/79GHz) in advanced driver assistance systems – an indispensable prerequisite for autonomous driving.

The key criteria is a fast, interference-free signal transmission with minimal losses. The losses can be devided into dielectric, resistive, reflection-based and losses generated by emissions. For example, the RF signal in the PCB is influenced by various parameters such as conductor length, base material (loss factor and dielectric constant), reflections due to drilling, impedance matching, crosstalk and interference from external sources (EMC shielding).

AT&S addresses all these aspects. By way of example, AT&S is working intensively on new materials to further reduce the dielectric constant and the loss factor. Other innovative solutions include for example very thin copper foils with low roughness (with sufficient adhesion) for maximum speed or asymmetric hybrid or sandwich structures (e.g. FR4 for the digital layer and ceramic materials such as PTFE for the high-speed layer) for cost-effective PCB technologies up to frequencies of 80GHz.

Share

Print


Suggested Items

The Institute of Circuit Technology Annual Symposium 2018

06/18/2018 | Pete Starkey, I-Connect007
ICT technical director Bill Wilkie is well-known for choosing notable venues for Institute of Circuit Technology events, and his choice for this year’s Annual Symposium was the National Motor Museum, located in the village of Beaulieu in the heart of the New Forest, a national park in the county of Hampshire in Southern England. The region is known for its heathland, forest trails and native ponies.

Show & Tell: Corporate Awards Bestowed by IPC

04/03/2018 | Patty Goldman, I-Connect007
Every year IPC recognizes two companies that have made significant contributions to IPC and the electronics industry. These awards are named after industry executives who were themselves significant and outstanding contributors: one for a PCB fabricator company and one for an electronics manufacturing services (EMS) company. This year’s recipients were Northrop Grumman and Rockwell Collins, respectively.

Weiner’s World—December 2017

01/02/2018 | Gene Weiner, Weiner International Inc.
Hold on to your seats! 2018 will be a year full of rapid changes, surprises, and growth. M&A activities will flourish. The supply chain will suffer shortages and changes as demand increases, copycats will rush to market, and new markets and potential suppliers will vanish before they are established.



Copyright © 2019 I-Connect007. All rights reserved.