Rogers to Exhibit Latest Material Solutions at IPC APEX EXPO 2019
Rogers Corporation will be exhibiting at the IPC APEX EXPO 2019, January 29 through January 31, at the San Diego Convention Center in San Diego, California. The IPC APEX EXPO is the leading event for the printed circuit board and electronics manufacturing and assembly industry, providing a full technical conference along with the exhibitor expo.
Rogers Corp. (booth #117) will be exhibiting a wide array of its high-performance circuit materials, including thin RO4000 materials for use in advanced millimeter wave multi-layer designs, high impedance laminates for antennas, and a newly introduced laminate for use in radar sensors. It will also contribute to the technical conference with a presentation on January 29 by John Coonrod, technical marketing manager.
New Laminate for Radar Sensors
Rogers will showcase its recently launched RO3003G2laminate for use in radar sensor designs. RO3003G2 laminates build on Rogers’ industry leading RO3003 platform to provide radar sensor designers with improved insertion loss and reduced dielectric constant (Dk) variation.
The combination of optimized resin and filler content along with the introduction of Very Low Profile ED copper translates to a Dk of 3.00 @ 10 GHz (clamped stripline method) & 3.07 @ 77 GHz (microstrip differential phase length method).
These laminates also show very low insertion loss of 1.3dB/inch for 5 mil laminates as measured by the microstrip differential phase length method.
RO4000 Products for Multi-Layer Structures:
RO4000 Thin Materials are next generation products designed to meet the existing and emerging needs of advanced millimeter wave multi-layer designs.
RO4835T laminates, offered in a 2.5 mil, 3 mil and 4 mil core thickness, are 3.3 Dk, low loss, spread glass reinforced, ceramic filled thermoset materials designed for inner-layer use in multilayer board designs, and complement RO4835 laminates when thinner cores are needed. RO4450T Bonding Materials are 3.2-3.3 Dk, low loss, spread glass reinforced, ceramic filled bonding materials that were designed to complement RO4835T and the existing RO4000 laminate family, and come in 3 mil, 4 mil or 5 mil thicknesses.
RO4835T laminates and RO4450T bonding materials exhibit excellent Dk control for repeatable electrical performance, a low z axis expansion for plated through hole reliability, and are compatible with standard epoxy/glass (FR-4) processes.
These materials are an excellent choice for multilayer designs requiring sequential laminations, as fully cured RO4000 products are capable of withstanding multiple lamination cycles. RO4835T laminate and RO4450T bondply have the UL 94 V-0 flame retardant rating, and are compatible with lead-free processes.
Lastly, CU4000 and CU4000 LoPro Foilsare sheeted foil options for designers looking for foil lamination builds, and provide good outer layer adhesion when used with RO4000 products.
MAGTREX 555 Laminates:
MAGTREX 555 laminates are the first product in a new platform of high impedance laminates featuring a high permeability and permittivity. These high impedance laminates enable antenna designers to expand the trade-space of their antenna design enabling up to a factor of six reduction in size with minimal impact on bandwidth, up to a factor of six increase in bandwidth with similar size, or a design optimum in between.
These high impedance laminates feature a low X, Y, Z CTE closely matched to copper for thermal reliability and are available in thicknesses from 20 to 250 mils They are offered with or without copper cladding.
Technical Conference Presentation:
On the technical conference side, John Coonrod’s presentation: “Insertion Loss Performance Differences Due to Plated Finish & Different Circuit Structures”, will take place on January 29, from 3:15 – 5:00 p.m. This is part of the High Frequency Test Methods Task Group.
About Rogers Corporation
Rogers Corporation is a global leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, internet connectivity, and safety and protection applications, as well as other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, e-Mobility and renewable energy; Elastomeric Material Solutions for sealing, vibration management and impact protection in mobile devices, transportation interiors, industrial equipment and performance apparel; and Advanced Connectivity Solutions for wireless infrastructure, automotive safety and radar systems. Headquartered in Arizona (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide.