RTW IPC APEX EXPO 2019: A Conversation with Burkle’s David Howard and Kurt Palmer


Reading time ( words)

Burkle North America's David Howard has chosen to take a well-earned retirement, and introduces Pete Starkey to his worthy successor Kurt Palmer.

To watch the interview, click here.

 

Share

Print


Suggested Items

Schmoll and Burkle: Lasers and Drills for GreenSource

12/14/2018 | Patty Goldman, I-Connect007
While at GreenSource Fabrication, Burkle Automation Technology’s Dave Howard introduced me to the Schmoll equipment as well as other items that Burkle installed at the facility. One unit of great interest was the Impex inspection machine which can do sophisticated non-destructive cross-sections using a very fine fiber probe.

GreenSource: The Future

11/26/2018 | Nolan Johnson, I-Connect007
This issue is a special one. We devote the entire magazine to a detailed look at Green-Source Fabrication (a division of Whelen Engineering) and its brand new, fully automated HDI facility in New Hampshire. GreenSource is arguably the most advanced and automated fabrication facility in North America today.

The Power of Three: A Solder Mask Solution for North America

03/10/2017 | Dick Crowe, Burkle NA
Technology and process developments in mature industries like the printed wiring board industry are not always easy. Many new products are evolutionary enhancements of existing processes. Often, these developments enhance the process and improve overall process control.



Copyright © 2019 I-Connect007. All rights reserved.