RTW IPC APEX EXPO: Rogers' Anthony Mattingly Discusses the Advanced Laminate Market


Reading time ( words)

Rogers Corporation's Senior Product Manager Anthony Mattingly and Editor Pete Starkey discuss the ever-evolving market for advanced laminates for technologies such as 5G. Mattingly explains how Rogers has invested heavily in infrastructure for adding about 40% more capacity in the next few years.

To watch this interview, click here.

Share

Print


Suggested Items

Conductivity Laminate for High-frequency Applications

12/04/2019 | Pete Starkey, I-Connect007
Editor Pete Starkey and Vitali Judin discuss how Rogers Corporation has responded to demands for high thermal conductivity combined with low loss in high-power RF applications with the newly launched. The PTFE-based TC350 Plus is capable of handling temperatures above 125°C and draws upon Rogers’ long experience with the TC350 material line-up.

EIPC Summer Conference 2019, Day 2

09/12/2019 | Alun Morgan, EIPC
In this article, EIPC Chairman Alun Morgan provides the highlights of the second day of the EIPC 2019 Summer Conference, which was held in the beautiful city of Leoben in central Austria. He also talks about key points of the numerous technical presentation at the conference.

An Examination of Glass-fiber and Epoxy Interface Degradation in Printed Circuit Boards

07/12/2019 | Bhanu Sood, Michael Osterman, and Michael Pecht, Center for Advanced Life Cycle Engineering
Multilayer organic laminates, which make up over 90% of the interconnecting substrates in electronics (standard FR-4 represents 85% of the substrates used for laminates), can develop a loss of electrical insulation resistance between two biased conductors due to conductive filament formation.



Copyright © 2020 I-Connect007. All rights reserved.