RTW IPC APEX EXPO 2019: CBT and Technica’s Relationship, Roadmap, and Equipment


Reading time ( words)

Pete Starkey speaks with David J. Clark, CBT project director, and Najib Khan, photoimaging product manager at Technica, who explain the background of their companies and their current working relationship. Further, they address their technology roadmap, and the unique features of their direct imaging equipment—particularly the registration accuracy that can be achieved.

To watch the interview, click here.

Share

Print


Suggested Items

Electrolytic Plating: Filling Vias and Through-holes

05/28/2019 | M. Özkök, S. Lamprecht, A. Özkök, D. Akingbohungbe, and M. Dreiza, Atotech Deutschland Gmbh; and A. Stepinski, Greensource Fabrication
The continuously evolving electronics industry environment is causing the development of various electrolytic copper processes for different applications over the past several decades. This article describes the reasons for development and a roadmap of dimensions for copper-filled through-holes, microvias, and other copper-plated structures on PCBs.

Vertical Conductive Structures, Part 1: Rethinking Sequential Lamination

05/13/2019 | Joan Tourné, NextGIn Technology BV
Sequential lamination, as it is used today in high density interconnect (HDI) and derivative technologies, is constrained by the fact that one cannot plate a blind hole deeper than the diameter of the hole. A larger hole allows processes to plate deeper. In fact, this manufacturing constraint has made it a challenge even to reliably plate and process blind holes up to a 1:1 aspect ratio.

Staying Current on Flex Manufacturing is Smart Business

04/04/2019 | Barry Matties, I-Connect007
Brendan Hogan, managing director of smart electronics manufacturer MivaTek Global, discusses how to better design for flex, and ways designers can stay current on manufacturing technology that can impact their flex boards.



Copyright © 2019 I-Connect007. All rights reserved.